| 基于ADAMS的滚珠丝杠副滚珠循环系统的动态仿真 |
| |
| 引用本文： | 战晓明,汤文成,汪爱清.基于ADAMS的滚珠丝杠副滚珠循环系统的动态仿真[J].机械制造与自动化,2010,39(2):110-113,119. |
| |
| 作者姓名： | 战晓明 汤文成 汪爱清 |
| |
| 作者单位： | 1. 东南大学,机械工程学院,江苏,南京,211189
2. 南京工艺装备制造有限公司,江苏,南京,210004 |
| |
| 摘 要： | 研究滚珠丝杠副的滚珠循环系统的回珠曲线的理论模型,并在Pro/E中建立反向器的三维模型.使用接口软件向ADAMS中输入丝杠的装配模型.根据赫兹接触理论和冲击函数模型,在多体动态软件ADAMS建立动态仿真模型,得出滚球在运转过程中进出反向器的能量、冲击力的变化情况,为回珠曲线的优化提供指导性依据.
|
| 关 键 词： | 滚珠丝杠副 回珠曲线 |
Dynamic Simulation of Ballscrew's Ball-returning Circulatory System Based on ADAMS |
| |
| ZHAN Xiao-ming,TANG Wen-cheng,WANG Ai-qing.Dynamic Simulation of Ballscrew's Ball-returning Circulatory System Based on ADAMS[J].Machine Building & Automation,2010,39(2):110-113,119. |
| |
| Authors: | ZHAN Xiao-ming TANG Wen-cheng WANG Ai-qing |
| |
| Affiliation: | ZHAN Xiao-ming1,TANG Wen-cheng1,WANG Ai-qing2(1.Department of Mechanical Engineering,Southeast University,Nanjing 211189,China,2.Nanjing Technical Equipment Manufacture CO.,LTD.,Nanjing 210004,China) |
| |
| Abstract: | This paper researches into ball-returning curve theoretical mode and builds the ball-returning device 3D mode by the Pro/E software.The interface software is used to transfer the ballscrew assembly CAD mode from Pro/E to ADAMS and according to the Hertz contact theory and impulse function mode,the dynamic simulation mold is set up in ADAMS.Through this simulation we can get the change of energy and impact force when the balls are in and out the ball-returning device.These data can supply guidance basis for ... |
| |
| Keywords: | Pro/E ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
