| 基于模糊控制的金刚石砂轮电火花整形研究 |
| |
| 引用本文： | 王志强,任成祖,高大晓,靳新民.基于模糊控制的金刚石砂轮电火花整形研究[J].电加工与模具,2007(3):18-19. |
| |
| 作者姓名： | 王志强 任成祖 高大晓 靳新民 |
| |
| 作者单位： | 天津大学先进陶瓷与加工技术重点实验室,天津,300072 |
| |
| 摘 要： | 电火花加工技术是金刚石砂轮整形和改善表面质量的有效方法.电火花放电状态同极间间隙密切相关.通过分析和实验,识别了表征放电状态的参数与极间间隙之间的关系,基于模糊控制策略,建立了计算机控制系统.实验证明,该方法可显著提高加工效率.
|
| 关 键 词： | 电火花加工 放电状态表征参数 电极间隙 模糊控制 |
| 修稿时间： | 2006-12-25 |
Grinding Wheel Finishing Using EDM Based on Fuzzy Control |
| |
| Wang Zhiqiang,Ren Chengzu,Gao Daxiao,Jin Xinmin.Grinding Wheel Finishing Using EDM Based on Fuzzy Control[J].Electromachining & Mould,2007(3):18-19. |
| |
| Authors: | Wang Zhiqiang Ren Chengzu Gao Daxiao Jin Xinmin |
| |
| Affiliation: | Tianjin University,Tianjin 300072,China |
| |
| Abstract: | It is an effectual way to improve the figure and the surface quality of diamond grinding wheel using EDM. The status of EDM is interrelated with gap of electrode. The relation of two parameters deputizing for EDM status and electrode gap is identified. One computer-control system is set up based on the fuzzy-control strategy. It is proved that the efficiency is improved markedly using this way by the experiment. |
| |
| Keywords: | EDM parameters deputizing for EDM status electrode gap fuzzy-control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
