| 中厚板轧机平面形状控制功能的在线应用 |
| |
| 引用本文： | 矫志杰,胡贤磊,赵忠,李海涛,郭剑飞,刘相华.中厚板轧机平面形状控制功能的在线应用[J].钢铁研究学报,2007,19(2):56-0. |
| |
| 作者姓名： | 矫志杰 胡贤磊 赵忠 李海涛 郭剑飞 刘相华 |
| |
| 作者单位： | 1. 东北大学轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004
2. 唐山钢铁股份有限公司冷轧薄板厂,河北,唐山,063016 |
| |
| 摘 要： | 对平面形状控制理论模型进行简化，将厚度变化区间内厚度变化量与长度简化成线性关系；应用考虑全粘着条件的前滑模型，通过离散化处理计算楔形段轧制过程时间；确定平面形状控制参数，并进行极限值的检查修正。在现场成功实现平面形状控制功能，获得较好的效果。
|
| 关 键 词： | 中厚板轧机 平面形状控制 控制模型 前滑 在线应用 |
| 文章编号： | 1001-0963(2007)02-0056-04 |
| 收稿时间： | 1900-01-01; |
| 修稿时间： | 10 27 2006 12:00AM |
On-Line Application of Plan View Pattern Control Function for Plate Mill |
| |
| JIAO Zhi-jie,HU Xian-lei,ZHAO Zhong,LI Hai-tao,GUO Jian-fei,LIU Xiang-hua.On-Line Application of Plan View Pattern Control Function for Plate Mill[J].Journal of Iron and Steel Research,2007,19(2):56-0. |
| |
| Authors: | JIAO Zhi-jie HU Xian-lei ZHAO Zhong LI Hai-tao GUO Jian-fei LIU Xiang-hua |
| |
| Affiliation: | 1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China; 2. Cold Mill Plant, Tangshan Iron and Steel Co Ltd, Tangshan 063016, Hebei, China |
| |
| Abstract: | The theory control model for the plan view pattern control function was simplified; the relation between the thickness and the length of the taper was simplified and a linear relationship was obtained. Using the forward slip model with the adhesion condition, the taper rolling time can be calculated by discrete treatment. The control parameters can be got and the results should be checked and be corrected if over limit. The plan view pattern control function had been used on site, and better effect had been got. |
| |
| Keywords: | plate mill plan view pattern control control model forward slip application on site |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
