|
|||||
|
|
| 用圆柱铣刀加工带冠弯扭叶片 | |
| 引用本文： | 何兆太,刘鹄然,蔚孝华.用圆柱铣刀加工带冠弯扭叶片[J].组合机床与自动化加工技术,2002(4):36-38,40. |
| 作者姓名： | 何兆太 刘鹄然 蔚孝华 |
| 作者单位： | 1. 黄石高等专科学校,湖北,黄石,435003 2. 中南大学,机电工程学院,湖南,长沙,410075 3. 东方汽轮机厂,四川,德阳,61800 |
| 基金项目： | 湖南省科委基础研究基金资助 |
| 摘 要： | 本文把微分几何中曲线与曲面之间的“切触”概念应用于叶片复杂曲面的数控加工，提出用圆柱铣刀的外圆在五坐标联动中加工小曲率曲面的最佳切触条件。 |
| 关 键 词： | 带冠弯扭叶片 圆柱铣刀 三维自由曲面 切触 数控加工 |
| 文章编号： | 1001-2265(2002)04-0036-04 |
A new theory for machining sculptured surface |
|
| HE Zhaotai,LIU Huran,WEI Xiaohua.A new theory for machining sculptured surface[J].Modular Machine Tool & Automatic Manufacturing Technique,2002(4):36-38,40. | |
| Authors: | HE Zhaotai LIU Huran WEI Xiaohua |
| Affiliation: | HE Zhaotai LIU Huran WEI Xiaohua |
| Abstract: | In this paper an innovative theory for machining complicated surface is presented. By using a disc cutter instead of ball-end miller, and adjusting the axis relative to the surface,the formed surface has the same curvature as the required surface ,up to as high as third order. |
| Keywords: | cylindrical tool miller sculptured surface contact |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |