| 基于Pro/Engineer车身外形的反求设计 |
| |
| 引用本文： | 徐林红,李齐.基于Pro/Engineer车身外形的反求设计[J].现代机械,2005(4):78-80. |
| |
| 作者姓名： | 徐林红 李齐 |
| |
| 作者单位： | 中国地质大学,机电工程学院,机电工程教研室,湖北,武汉,430074 |
| |
| 摘 要： | 随着RP行业的迅速发展,反求工程在快速成型制造领域中的作用日趋重要。它作为一种新的产品设计思想和方法越来越广泛地应用于汽车、模具等快速成型制造领域,并取得了很多成果。本文以Pro/Engineer为设计平台,利用跟踪草绘功能对产品模型进行外形重构,实现了东风标致307车模外形的反求设计。
|
| 关 键 词： | 反求工程 Pro/Engineer 跟踪草绘 车身重构 |
| 文章编号： | 1002-6886（2005）04-0078-03 |
| 收稿时间： | 2005-5-7 |
| 修稿时间： | 2005年5月7日 |
Reverse Design of Body Surface Based on Pro/Engineer |
| |
| XU Lin-hong,LI Qi.Reverse Design of Body Surface Based on Pro/Engineer[J].Modern Machinery,2005(4):78-80. |
| |
| Authors: | XU Lin-hong LI Qi |
| |
| Abstract: | With the rapid development of RP, the role of the reverse engineering becomes more and more important in the Rapid Prototyping & Manufacturing than before. As a new idea and method of the new product design, it is widely used in the Rapid Prototyping & Manufacturing and has made many achievements. The reverse design of the DongFeng PEUGEOT 2.0 figuration is realized in this article by using the function of the Pro/Engineer. |
| |
| Keywords: | reverse engineering Pro/Engineer tracking drawing reconstructing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
