| 低碳微合金双相钢沉淀相粒子的分析 |
| |
| 引用本文： | 陈连生,李秀景,褚春光,高华,耿立唐.低碳微合金双相钢沉淀相粒子的分析[J].特殊钢,2008,29(4):55-57. |
| |
| 作者姓名： | 陈连生 李秀景 褚春光 高华 耿立唐 |
| |
| 作者单位： | 1 东北大学轧制技术及连轧自动化国家重点实验室，沈阳110004;
2 河北理工大学冶金与能源学院，唐山063009;
3 唐山钢铁公司第一钢轧厂，唐山063016 |
| |
| 摘 要： | 采用萃取复型技术研究了实验室Φ450轧机控轧控冷后铁素体-马氏体双相钢(%:0.08C、0.22Si、1.02Mn、0.02Nb、0.013Ti、0.034Al)中沉淀相粒子。结果表明,该钢在1200℃时就存在尺寸为几十纳米的(Nb,Ti) (CN),经X-射线能谱分析得出,小颗粒中Nb含量大于Ti含量,形状不规则,大颗粒沉淀相主要含Ti,Nb含量较少,呈长方形;经控轧控冷后(Nb,Ti)(CN)为间隙析出,且主要在晶界处析出。
|
| 关 键 词： | 双相钢 铁素体-马氏体 沉淀相粒子 萃取复型 |
| 收稿时间： | 2008-01-11 |
An Analysis on Precipitated Phase Particles in Low Carbon Micro-Alloying Dual Phase Steel |
| |
| Chen Liansheng,Li Xiujing,Chu chunguang,Gao Hua,Geng Litang.An Analysis on Precipitated Phase Particles in Low Carbon Micro-Alloying Dual Phase Steel[J].Special Steel,2008,29(4):55-57. |
| |
| Authors: | Chen Liansheng Li Xiujing Chu chunguang Gao Hua Geng Litang |
| |
| Affiliation: | 1TheStateKeyLaboratoryof Rolling&Automation,NortheastUniversity,Shenyang110004;
2Schoolof MetallurgyandEnergy Resources,HebeiPolytechnicUniversity,Tangshan063009;
3NolMill,TangshanIronandSteelCo,Tangshan063016 |
| |
| Abstract: | The precipitated phase particles in ferrite-martensite dual phase steel(0.08C,0.22Si,1.02Mn, 0.02Nb,0.013Ti,0.034Al)rolled by φ450 mill with control rolling and cooling process in laboratory has been studied by using carbon extraction-replica technique.Results showed that there was(Nb,Ti)(CN)precipitates with size being doz- ens nm at 1200 ℃; with energy dispersive X-ray spectrometer analysis,the Nb content in smaller particles was higher than Ti content of which the shape was irregular,and in large particle of which the shape was rectangle,main content was Ti with minor Nb; and in steel by control rolling and cooling,the(Nb,Ti)(CN)was interstitial precipitated phase and mainly precipitated at grain-boundary. |
| |
| Keywords: | |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
