| 多晶硅真空电磁感应熔炼除磷及其过程研制 |
| |
| 引用本文： | 罗大伟,孙金玲,张爽,卢一平,张国良,李廷举.多晶硅真空电磁感应熔炼除磷及其过程研制[J].功能材料,2011,42(9). |
| |
| 作者姓名： | 罗大伟 孙金玲 张爽 卢一平 张国良 李廷举 |
| |
| 作者单位： | 1. 大连理工大学材料科学与工程学院,辽宁大连,116024
2. 大连理工大学材料科学与工程学院,辽宁大连116024／大连理工大学三束材料改性教育部重点实验室,辽宁大连116024 |
| |
| 基金项目： | 国家自然科学基金重点资助项目(50674018) |
| |
| 摘 要： | 磷是多晶硅中的主要杂质元素之一,目前采用的酸洗以及定向凝固工艺无法将其含量降低到太阳能级多晶硅所要求的范围之内。采用自行设计的真空电磁感应熔炼炉及定向凝固炉研究了真空度、精炼时间和精炼温度对除磷效果的影响。研究结果表明当炉内压强为5.0×10-1 Pa时,精炼温度和时间分别为1723K和60min时,精炼后硅中磷含量由原来的2.0×10-5（质量分数）降低到1.8×10-6（质量分数）;研究推导出了在压强为5×10-1Pa下磷的含量随精炼时间和精炼温度的关系式如下：XP=X0Pexp（-1.43×10-4-3.1×10-7T）t]同时还对真空感应熔炼除磷过程进行了热力学与动力学分析。
|
| 关 键 词： | 多晶硅 电磁感应熔炼 动力学 热力学 |
Research on removal phosphorus from polysilicon and process development by vacuum induction melting |
| |
| LUO Da-wei,SUN Jin-ling,ZHANG Shuang,LU Yi-ping,ZHANG Guo-liang,LI Ting-ju.Research on removal phosphorus from polysilicon and process development by vacuum induction melting[J].Journal of Functional Materials,2011,42(9). |
| |
| Authors: | LUO Da-wei SUN Jin-ling ZHANG Shuang LU Yi-ping ZHANG Guo-liang LI Ting-ju |
| |
| Affiliation: | LUO Da-wei1,SUN Jin-ling1,ZHANG Shuang1,LU Yi-ping1,ZHANG Guo-liang1,LI Ting-ju1,2(1 School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,China,2.Ministry of Education Key Laboratory of Materials Modification by Laser,Ion and Electron Beams,China) |
| |
| Abstract: | Phosphorus is one of the main impurities in polysilicon.Currently,its content in polysilicon can not be reduced to level required by solar grade silicon(SOG-Si) through acid leaching and directional solidification processes.The effect of the vacuum degree,refining times and refining temperatures on phosphorus removal was investigated by the vacuum melting furnace and directional solidification furnace which were designed by us,respectively.The results showed that phosphorus content in silicon reduced from o... |
| |
| Keywords: | polysilicon electromagnetic induction melting dynamics thermodynamic |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
