| 用一次压制-一次烧结达到高密度 |
| |
| 引用本文： | Francis Hanejko,韩凤麟.用一次压制-一次烧结达到高密度[J].粉末冶金技术,2010,28(1). |
| |
| 作者姓名： | Francis Hanejko 韩凤麟 |
| |
| 作者单位： | Hoeganaes;Corporation;Cinnaminson; |
| |
| 摘 要： | 利用一次压制-一次烧结高密度工艺可使铁基粉末冶金材料的生产减低生产成本及制造性能较高的零件。用一次压制-一次烧结达到高密度是一个系统方法,需要制备原料粉的预混合粉和随后进行压制与烧结。这篇论文将说明有助于用一次压制-一次烧结达到密度7.5g/cm3所使用的粉末与生产工艺方法。烧结体密度达到这个水平的粉末冶金零件,与用现行压制工艺生产的相比,力学性能有显著改进,已接近锻钢的使用性能。
|
| 关 键 词： | 一次压制-一次烧结 粉末冶金 温压 AncorMax200 |
High density via single pressing/single sintering |
| |
| Francis Hanejko.High density via single pressing/single sintering[J].Powder Metallurgy Technology,2010,28(1). |
| |
| Authors: | Francis Hanejko |
| |
| Affiliation: | Hoeganaes Corporation Cinnaminson,NJ 08077 USA |
| |
| Abstract: | High density processing via single press/single sinter processing enables powder metallurgy processing of ferrous materials to be both more cost efficient and produce higher performance components.Obtaining high densities via single press/single sintering necessitates a systems approach to preparation of the starting powder premix and subsequent compaction and sintering.This paper will describe a powder and processing method that facilitates single press-single sintered densities approaching 7.5g/cm3.At thi... |
| |
| Keywords: | single pressing/single sintering PM warm compaction Ancor Max 200 |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
