Separation and recovery of heavy metals from concentrated smelting wastewater by synergistic solvent extraction using a mixture of 2-hydroxy-5-nonylacetophenone oxime and bis(2,4,4-trimethylpentyl) -phosphinic acid

Extraction and separation of copper, zinc, nickel, and cadmium from calcium and magnesium in concentrated smelting wastewater by synergistic solvent extraction using a mixture of 2-hydroxy-5-nonylacetophenone oxime (Mextral 84H) and bis(2,4,4 -trimethylpentyl)-phosphinic acid (Cyanex 272) in an aliphatic diluent (DT-100) was studied. The effects of extractant concentrations, equilibrium pH, organic-to-aqueous phase ratios, system temperature, and extraction and stripping efficiencies on the extraction performance of the heavy metals were investigated. Extraction of pH isotherms showed that addition of Cyanex 272 to Mextral 84H causes obvious synergistic shifts for zinc and cadmium and a slightly antagonistic shift for nickel. The separation factor of cadmium over magnesium was 155.7 and the ΔpH₅₀ values between the metals were over 1.00 pH units. Semi-continuous tests for the metals extraction, scrubbing, and stripping were conducted in a continuous extraction apparatus with conditions further optimized for separation of the metals. Nearly 100% of the copper and nickel and over 98% of the zinc and cadmium were recovered with less than 0.1 mg/L copper and nickel, 26 mg/L of zinc, and 10 mg/L of cadmium remaining in the raffinate. A process in which all valuable metals are extracted simultaneously and stripped selectively at optimal conditions is proposed that is entirely feasible for the separation of copper, zinc, nickel, and cadmium from calcium and magnesium in concentrated smelting wastewater. The study determines the fundamental parameters for the treatment of smelting wastewater by solvent extraction.