首页 | 本学科首页   官方微博 | 高级检索  
     

控轧控冷工艺对X100管线钢组织和性能的影响
引用本文:刘守显,罗海文,雍岐龙,王瑞珍,龙晋明.控轧控冷工艺对X100管线钢组织和性能的影响[J].特殊钢,2007,28(5):25-27.
作者姓名:刘守显  罗海文  雍岐龙  王瑞珍  龙晋明
作者单位:1. 昆明理工大学材料与冶金工程学院,昆明 650093; 2. 钢铁研究总院结构材料研究所,北京 100081;
摘    要:通过实验室φ350 mm 4辊轧机对V-Nb-Wi微合金化X100管线钢(%:0.057C、1.84Mn、0.25Mo)进行控轧控冷试验。结果表明,在1 100℃始轧,800~900℃终轧,100~400℃终冷温度下,X100钢的组织为针状铁素体+粒状贝氏体-下贝氏体。降低终轧温度可细化组织,提高钢的强度;降低终冷温度可提高钢的强度,但使钢的韧性降低。X100管线钢的最佳轧制工艺为终轧温度850℃,终冷温度200℃。

关 键 词:X100管线钢  控轧控冷  组织  机械性能  
收稿时间:2007-04-09
修稿时间:2007-04-09

Effect of Controlled Rolling and Cooling Process on Structure and Properties of X100 Pipeline Steel
Liu Shouxian,Luo Haiwen,Yong Qilong,Wang Ruizhen,Long Jinming.Effect of Controlled Rolling and Cooling Process on Structure and Properties of X100 Pipeline Steel[J].Special Steel,2007,28(5):25-27.
Authors:Liu Shouxian  Luo Haiwen  Yong Qilong  Wang Ruizhen  Long Jinming
Affiliation:1. Institute of Materials and Metallurgy Engineering,Kunming University of Science and Technology,Kunming 650093; 2. Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081;
Abstract:The controlled rolling and cooling test for a V-Nb-Ti microalloying X100 pipeline steel(0.057C,1.84Mn, 0.25Mo) has been caried out by φ350 mm 4 roll mill in laboratory.Results showed that with initial rolling temperature 1100 ℃,finishing temperature 800~900 ℃ and end cooling temperature 100~400 ℃ the structure of X100 steel was acicular ferrite + granular bainite-lower bainite; and with decreasing finishing temperature,the structure fined and strength of steel increased,with decreasing end cooling temperature the strength increased but the toughness of steel decreased. The optimum hot rolling process for X100 pipeline steel is finishing temperature 850 ℃ with end cooling temperature 200 ℃.
Keywords:X100 Pipeline Steel  Controlled Rolling and Cooling Process  Structure  Mechanical Properties
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号