首页 | 本学科首页   官方微博 | 高级检索  
     

LF炉热态钢渣的循环利用技术
引用本文:黄康乐,孙江波,窦为学,张鹏飞.LF炉热态钢渣的循环利用技术[J].河北冶金,2012(5):64-65,57.
作者姓名:黄康乐  孙江波  窦为学  张鹏飞
作者单位:河北敬业集团炼钢厂,河北平山,050400
摘    要:LF炉精炼后的钢渣仍含有一定量的硫,有再利用的价值;钢水浇铸后,减少钢包内的浇余可以提高金属收得率。通过对LF炉热态钢渣渣系及硫容量的分析,以Q345B钢为例,分别计算了钢渣循环利用三次时热态钢渣中硫容量和曼内斯曼指数的变化、热态钢渣循环利用对钢水脱硫和钢水升温等的影响。钢渣循环利用后,每炉钢可节约供电时间4~5 min,减少钢水浇余0.5~0.8 t,提高了金属收得率。

关 键 词:LF炉  热态钢渣  循环利用  技术

CIRCULATING UTILIZATION OF HOT STEEL SLAG OF LF FURNACE
Huang Kangle , Sun Jiangbo , Dou Weixue , Zhang Pengfei.CIRCULATING UTILIZATION OF HOT STEEL SLAG OF LF FURNACE[J].Hebei Metallurgy,2012(5):64-65,57.
Authors:Huang Kangle  Sun Jiangbo  Dou Weixue  Zhang Pengfei
Affiliation:(Steelworks, Hebei Jingye Group, Pingshan, Hebei, 050400)
Abstract:The steel slag from LF refining still contains some amount of sulphur and can be reused; to reduce remaining molten steel in ladle after casting can increase metal yield. Based on the analysis about hot steel slag system of LF furnace and sulphur content, taking Q345B steel as example, it is calculated separately the sulphur content in hot steel slag and Mannesmann index after steel slag being circulating utilized for three times and the influence of the circulating utilization on desulfurization and temperature - increasing of molten steel. With the circulating utilization the electricity - feeding time can be shortened by 4 to 5 minutes and casting - remaining molten steel reduced by 0.5 to 0.8 tons per heat, the metal yield increased.
Keywords:LF furnace  hot steel slag  circulating utilization  technique
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号