| 基于MATLAB的翻领成型器领口曲线的展开及可视化 |
| |
| 引用本文： | 易启伟.基于MATLAB的翻领成型器领口曲线的展开及可视化[J].包装工程,2004,25(6):41-43. |
| |
| 作者姓名： | 易启伟 |
| |
| 作者单位： | 武汉工业学院,武汉,430023 |
| |
| 摘 要： | 为使翻领成型器领口曲线的设计更精确、简便,并直观地反映出设计参数之间、设计参数与结果之间的关系及设计效果.根据翻领成型器领口曲线的数学模型,介绍利用MATLAB编程作展开的方法,并对中间待选参数的数据关系、展开曲线的平面图形及领口曲线的立体图形作可视化处理并予以直接显示.结果表明,MATLAB为翻领成型器领口曲线的展开设计及加工提供了快捷有效的途径,同时也为MATLAB用于包装机械的设计提供了一个很好的范例.
|
| 关 键 词： | 翻领成型器 领口曲线 展开 MATLAB 可视化 |
| 文章编号： | 1001-3563(2004)06-0041-02 |
| 修稿时间： | 2004年6月23日 |
MATLAB-based Spreading and Visualization of the Neckband Curve of a Lapel Shaping Device |
| |
| YI Qi-wei.MATLAB-based Spreading and Visualization of the Neckband Curve of a Lapel Shaping Device[J].Packaging Engineering,2004,25(6):41-43. |
| |
| Authors: | YI Qi-wei |
| |
| Abstract: | In order to obtain an accurate and simple design and to express the relation between design parameters, and between the parameters and the design effect,based on the mathematical model of the neckband curve of a lapel shaping device, a spreading method by using MATLAB software was introduced. The selected parameters, the spreading plot and the 3D neckband entity were all displayed visually in a computer. Through the operating practice, it was shown that the MATLAB-based method provided a rapid approach for the spreading design and manufacturing of the neckband curve and gives a valuable sample for the design of packaging machine. |
| |
| Keywords: | MATLAB |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
