| 汽车顶盖天窗侧翻边模设计 |
| |
| 引用本文： | 孙立岩,崔现虎.汽车顶盖天窗侧翻边模设计[J].模具工业,2013(7):26-28. |
| |
| 作者姓名： | 孙立岩 崔现虎 |
| |
| 作者单位： | 1. 长城汽车股份有限公司技术中心
2. 河北省汽车工程技术研究中心,河北 保定,071000 |
| |
| 摘 要： | 对天窗顶盖成形工艺进行分析,通过调整双动斜楔结构在一道工序内同时完成顶盖天窗4条边的侧翻边,减少模具数量,节省了模具制造成本,提高了生产效率。
|
| 关 键 词： | 侧翻边模 汽车顶盖 天窗 双动斜楔 |
Side flanging die for the skylight of car roof |
| |
| SUN Li-yan
,
CUI Xian-hu.Side flanging die for the skylight of car roof[J].Die & Mould Industry,2013(7):26-28. |
| |
| Authors: | SUN Li-yan CUI Xian-hu |
| |
| Affiliation: | (Technology Center of Great Wall Motor Co., Ltd.; Automotive Engineering Technology Center of Hebei, Baoding, Hebei 071000, China) |
| |
| Abstract: | Through analyzing the forming process of car roof skylight, a side flanging pro- cess of forming four edges of car roof skylight together was proposed by adjusting the structure of double-action cam driver, which can reduce the quantity of the dies, save the cost and improve the efficiency. |
| |
| Keywords: | side flanging die car roof skylight double-action cam driver |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
