| 半刚电缆组件焊接工艺优化研究 |
| |
| 引用本文： | 朱正虎,郝冠军.半刚电缆组件焊接工艺优化研究[J].电子工艺技术,2008,29(5). |
| |
| 作者姓名： | 朱正虎 郝冠军 |
| |
| 作者单位： | 中国航天科工集团8511研究所,江苏,南京,210007 |
| |
| 摘 要： | 针对目前电缆组件中常用的半刚电缆组件焊接问题进行了对比分析研究,针对使用过程中经常出现电缆组件开裂、脱落及电性能达不到指标要求等问题,通过多次焊接试验,自行研制的焊接夹具满足设计指标要求.与传统焊接工艺方法比较,使用此种焊接方法可将半刚电缆组件的电压驻波比(VSWR)平均由原来的1.5提高到1.3;成品焊接合格率由原来的60%提高到90%以上.
|
| 关 键 词： | 半刚电缆组件 焊接 夹具 电压驻波比 工艺优化 |
Optimized Soldering Process Research on Semi-rigid Cable Modules |
| |
| ZHU Zheng-hu,HAO Guan-jun.Optimized Soldering Process Research on Semi-rigid Cable Modules[J].Electronics Process Technology,2008,29(5). |
| |
| Authors: | ZHU Zheng-hu HAO Guan-jun |
| |
| Affiliation: | ZHU Zheng-hu,HAO Guan-jun(No.8511 Research Institute of CASIC,Nanjing 210007,China) |
| |
| Abstract: | Analysed and researched soldering problem of semi-rigid cable modules which often used in war industry at present.Aimed at the problems that crack,break off and electricity performance do not reach index requirement during used process.Developed a soldering fitting for several soldering experiments.Finally,gained a new soldering process through several experiments analysis and comparison.Average VSWR is improved from 1.5 to 1.3,soldering ratio up to 90% from 60% for the semi-rigid cable modules compared wit... |
| |
| Keywords: | Semi-rigid cable module Soldering Fitting VSWR Process optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
