| PET注拉吹制品壁厚分布的研究 |
| |
| 引用本文： | 尹沾松,黄汉雄,刘吉虎.PET注拉吹制品壁厚分布的研究[J].塑料工业,2006,34(7):22-25. |
| |
| 作者姓名： | 尹沾松 黄汉雄 刘吉虎 |
| |
| 作者单位： | 1. 华南理工大学工业装备与控制工程学院塑料橡胶装备及智能化研究中心,广东,广州,510640
2. 华南理工大学工业装备与控制工程学院塑料橡胶装备及智能化研究中心,广东,广州,510640;桂林电子工业学院机电与交通工程系,广西,桂林,541004 |
| |
| 摘 要： | 通过注射拉伸吹塑实验分析了二次吹胀压力、拉伸杆速度以及吹胀延迟时间对瓶子轴向壁厚分布的影响。实验结果表明：吹胀压力的改变对瓶子轴向壁厚分布影响不大，拉伸杆速度与吹胀延迟时间的变化对瓶子轴向壁厚分布有显著影响。吹胀延迟时间的改变会形成不同的型坯轮廓发展模式，在注拉吹可视化实验结果的基础上，结合应力和温度场两方面的因素解释了型坯轮廓发展模式的成因。
|
| 关 键 词： | 注射拉伸吹塑 聚对苯二甲酸乙二醇酯 壁厚分布 |
| 文章编号： | 1005-5770(2006)07-0022-04 |
| 收稿时间： | 2006-04-04 |
| 修稿时间： | 2006年4月4日 |
Study of Thickness Distribution of Injection-stretch-blow PET Molded Part |
| |
| YIN Zhan-song,HUANG Han-xiong,LIU Ji-hu.Study of Thickness Distribution of Injection-stretch-blow PET Molded Part[J].China Plastics Industry,2006,34(7):22-25. |
| |
| Authors: | YIN Zhan-song HUANG Han-xiong LIU Ji-hu |
| |
| Affiliation: | 1.Center for Polymer Processing Equipment and Intelleetualization, College of Industrial Equipment and Control Eng. , South China University of Technology, Guangzhou, 510640, China; 2. Dept. of Eleetronie Maehinery, Guilin University of Electronie Teehnology, Guilin 541004, China |
| |
| Abstract: | The effects of high blow pressure, stretch rate of stretch rod and preblowing delay-time on the longitudinal wall thickness distribution of stretch blow molded bottle were analyzed by injection-stretch-blow molding experiments. The results showed that the blow pressure had insignificant effect on the longitudinal wall thickness distribution of bottle, but the stretch rate of stretch rod and the preblowing delay time had significant effects on the distribution. The change of preblowing delay-time resulted in different modes of preform growth. Based on the results of visualization experiments, the cause for different preforming growth modes were studied in the light of stress and temperature. |
| |
| Keywords: | Injection-stretch-blow Molding PET Wall Thickness Distribution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
