首页 | 本学科首页   官方微博 | 高级检索  
     

气固法制备IF_5工艺
引用本文:刘春雪,崔学文,郝树海.气固法制备IF_5工艺[J].化学工业与工程,2013,30(5):52-54.
作者姓名:刘春雪  崔学文  郝树海
作者单位:核工业理化工程研究院,天津,300180
摘    要:以碘单质和氟气为原料,采用气固法制备IF5,其中氟气间歇式通入反应器,氟气流量约为28~30 L/min,反应压力不高于-0.01 MPa。研究了反应温度、原料配比(物质的量之比)和碘加入量对反应的影响。结果表明,制备IF5的最适宜条件为:反应过程温度控制在80~100℃之间,氟气与碘的配比(物质的量之比)约6∶1,在容积为100 L的反应器内碘加入量约10 kg。此条件下,得到质量分数为99%的IF5产品的产率最大为87.32%。

关 键 词:  氟气  IF5  气固反应

IF5 Preparation Technics by Gas-Solid Reaction
LIU Chun-xue,CUI Xue-wen,HAO Shu-hai.IF5 Preparation Technics by Gas-Solid Reaction[J].Chemical Industry and Engineering,2013,30(5):52-54.
Authors:LIU Chun-xue  CUI Xue-wen  HAO Shu-hai
Affiliation:(Research Institute of Physical and Chemical Engineering of Nuclear Industry,Tianjin 300180,China)
Abstract:IF5 was prepared with I2 and F2 by gas-solid reaction,the flow rate of F2 is 28—30 L/min and reaction pressure is under-0.01 MPa.The influence of reaction temperature,molar ratio of reactants and adding amount of I2 were investigated.Results showed that the optimal conditions of preparing IF5 were: reaction temperature between 80—100 ℃,molar ratio of F2 to I2 is 6∶1,adding amount of I2 was 10 kg in 100 L reactor.Under these conditions,the biggest yield of IF5 could reach 87.32% with purity of 99%.
Keywords:I2  F2  IF5  gas-solid reaction
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号