| 样条配点法在汽轮机转子矫直分析中的应用 |
| |
| 引用本文： | 刘宗德,杨昆,王燮山,赵敏.样条配点法在汽轮机转子矫直分析中的应用[J].中国电机工程学报,2000,20(3):1-4. |
| |
| 作者姓名： | 刘宗德 杨昆 王燮山 赵敏 |
| |
| 作者单位： | 1. 华北电力大学动能系,北京,102206
2. 东北电业职工大学,辽宁省,沈阳市,110015 |
| |
| 基金项目： | 国家自然科学基金!1970 2 0 0 3，中华电力教育基金 |
| |
| 摘 要： | 对转子钢进行了短时蠕变和高温强度实验，得到了该材料在直轴温度范围内的蠕变方程和强度与温度关系曲线。对直轴过程的温度场进行了分析，得到了转轴径向温差的分布规律。利用样条函数配点法，编制了汽轮机转子的矫直分析软件。数值结果表明分析方法是有效的，可求出转轴在加载后不同时刻的矫直量和矫直后的残余应力，为任意弯曲形状的转子提供优化的矫直方案。
|
| 关 键 词： | 转子矫直 转子钢 蠕变特性 样条配点法 汽轮机 |
| 文章编号： | 0258-8013 (2000) 03-0001-04 |
| 修稿时间： | 1999-01-29 |
APPLICATION OF THE SPLINE FUNCTION COLLOCATION POINT METHOD ON CREEP ALIGNMENT OF A ROTOR OF STEAM TURBINE |
| |
| LIU Zong-de,YANG Kun,WANG Xie-shan,ZHAO Ming.APPLICATION OF THE SPLINE FUNCTION COLLOCATION POINT METHOD ON CREEP ALIGNMENT OF A ROTOR OF STEAM TURBINE[J].Proceedings of the CSEE,2000,20(3):1-4. |
| |
| Authors: | LIU Zong-de YANG Kun WANG Xie-shan ZHAO Ming |
| |
| Abstract: | The mechanical
behaviors and creep features of 30Cr2MoV steel of rotor at high temperature were studied
experimentally. The temperature distribution of a heated rotor was studied theoretically.
Based on existing creep theory and the spline function collocation point method, a
numerical method was developed to calculate the transient creep strain and stress of a
rotor of steam turbine to be aligned. The transient creep displacement, the residual
bending value and the residual stress after unloading can be predicted by the software.
The numerical results show that the analysis method of the paper is reasonable. By means
of the software, it is easy to decide loading and heating scheme for the creep alignment
technique of rotors. |
| |
| Keywords: | aligning a rotor creep behaviors of rotor steel spline function collocation point method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
