| 基于AMESim的剪板机液压系统动态性能分析 |
| |
| 引用本文： | 王存堂,孙卓兵,谢方伟,张兵,盛刚.基于AMESim的剪板机液压系统动态性能分析[J].液压与气动,2016,0(7):29-33. |
| |
| 作者姓名： | 王存堂 孙卓兵 谢方伟 张兵 盛刚 |
| |
| 作者单位： | 江苏大学 机械工程学院, 江苏 镇江 212013 |
| |
| 基金项目： | 江苏省科技支撑基金(BE2013009-3); 镇江市科技支撑计划 (SYF320150130267) |
| |
| 摘 要： | 为了提高剪板机的主动安全性,改善剪板机液压系统的动态性能,在介绍剪板机液压系统工作原理的基础上,AMESim模式下建立了剪板机液压系统的仿真模型。重点研究了插装阀阻尼孔直径和蓄能器预充压力对剪板机主液压缸和压料缸动作性能的影响,以及为了使压料缸的压紧力可控,在压料缸和油泵之间加入一个定值输出减压阀。仿真结果对剪板机液压系统的改进具有一定的指导作用。
|
| 收稿时间： | 2016-03-25 |
Analysis Based on AMESim for Dynamic Performance of Plate Shear’s Hydraulic System |
| |
| WANG Cun-tang,SUN Zhuo-bing,XIE Fang-wei,ZHANG Bing,SHENG Gang.Analysis Based on AMESim for Dynamic Performance of Plate Shear’s Hydraulic System[J].Chinese Hydraulics & Pneumatics,2016,0(7):29-33. |
| |
| Authors: | WANG Cun-tang SUN Zhuo-bing XIE Fang-wei ZHANG Bing SHENG Gang |
| |
| Affiliation: | School of Mechanical Engineering, Jiangsu University, Jiangsu, Zhenjiang 212013 |
| |
| Abstract: | In order to improve the active safety of plate shear and dynamic performance of its hydraulic system, a simulation model of the hydraulic system is established in AMESim software, and then the influence law of operating characteristics of the master cylinder and the pressure pot of the plate shear, affected by the orifice diameter and maximum accumulator precharge pressure of the cartridge valve, are obtained. In order to obtain the controllable pressure force, we add a reducing valve between cylinder and oil pump, and the simulation results give a guidance for the improvements of plate shear’s hydraulic system. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《液压与气动》浏览原始摘要信息 |
|
点击此处可从《液压与气动》下载全文 |
|
