| 卧式加工中心工件旋转坐标系的换算 |
| |
| 引用本文： | 唐红春,周丹江.卧式加工中心工件旋转坐标系的换算[J].机电工程技术,2011(12):108-109. |
| |
| 作者姓名： | 唐红春 周丹江 |
| |
| 作者单位： | 武汉工程职业技术学院,湖北武汉,430415 |
| |
| 摘 要： | 通过对卧式加工中心的回转工作台旋转坐标系建立数学模型,编制宏程序,利用宏程序自动计算工件坐标系偏置值,避免了操作过程中产生的误差.
|
| 关 键 词： | 卧式加工中心 旋转坐标系 宏程序 |
Rotary Coordinate System Conversion of Workpiece in Horizontal Processing Center |
| |
| TANG Hong-chun
,
ZHOU Dan-jiang.Rotary Coordinate System Conversion of Workpiece in Horizontal Processing Center[J].Mechanical & Electrical Engineering Technology,2011(12):108-109. |
| |
| Authors: | TANG Hong-chun ZHOU Dan-jiang |
| |
| Affiliation: | (Wuhan Engineering Institute,Wuhan 430415,China) |
| |
| Abstract: | To avoid the operating process of produce error,established a mathematical model of the horizontal processing center rotary worktable rotate coordinate system,prepared macro program,by which the work coordinate system offset can be computed automatically. |
| |
| Keywords: | horizontal processing center rotating coordinate system macro programs |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
