首页 | 本学科首页   官方微博 | 高级检索  
     

热固性酚醛树脂基微滤炭膜的制备
引用本文:魏微,胡浩权,秦国彤,尤隆渤.热固性酚醛树脂基微滤炭膜的制备[J].材料科学与工程学报,2006,24(2):205-208.
作者姓名:魏微  胡浩权  秦国彤  尤隆渤
作者单位:北京联合大学应用文理学院环境科学系,北京,100083;大连理工大学碳资源综合利用开放实验室,辽宁,大连,116012;北京航空航天大学材料学院环境工程系,北京,100083
基金项目:中国科学院资助项目 , 北京市教委科技发展计划项目
摘    要:实验合成了球形热固性酚醛树脂微粒,并以此为原料制备了微滤炭膜.炭膜的孔径分布结果表明,在原料粒度较小的情况下,所制得的炭膜孔径分布较窄,平均孔径和气体透量较小.对几种常见的粘结剂进行了筛选,当以甲基纤维素为粘结剂时,随着甲基纤维素用量的增加,微滤炭膜的孔径分布变窄,平均孔径及气体透量减小.炭化条件中炭化终温对炭膜性能的影响较大.

关 键 词:微滤炭膜  热固性酚醛树脂  孔径分布
文章编号:1673-2812(2006)02-0205-04
修稿时间:2005年7月2日

Preparation of Thermosetting Phenol-formaldehyde Resin-based Carbon Microfiltration Membrane
WEI Wei,HU Hao-quan,QIN Guo-tong,YOU Long-bo.Preparation of Thermosetting Phenol-formaldehyde Resin-based Carbon Microfiltration Membrane[J].Journal of Materials Science and Engineering,2006,24(2):205-208.
Authors:WEI Wei  HU Hao-quan  QIN Guo-tong  YOU Long-bo
Abstract:The carbon microfiltration membranes were prepared by pyrolysis of a home-made thermosetting phenol-formaldehyde(PF) resin.Experiments were carried out to investigate the effects of thermosetting PF resin particle size distribution,additives and carbonization conditions on the characteristics of carbon membrane.With thermosetting PF resin particle size increasing,the pore size distribution of carbon membrane became broadly,the average pore diameter and gas permeation rates of carbon membrane increased.The shape of thermosetting PF particle is roundness which resulted in narrow pore size distribution.Adhesive and carbonization temperature also affect the characteristics of carbon membrane.
Keywords:carbon microfiltration membrane  thermosetting phenol-formaldehyde resin  pore size distribution
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号