| 聚丙烯固相接枝马来酸酐的研究 |
| |
| 引用本文： | 杨爱华,涂绍勇,万晶晶,马红霞,陈燕.聚丙烯固相接枝马来酸酐的研究[J].化学与生物工程,2009,26(10):30-32. |
| |
| 作者姓名： | 杨爱华 涂绍勇 万晶晶 马红霞 陈燕 |
| |
| 作者单位： | 1. 武汉生物工程学院化学与环境工程系,湖北,武汉,430415
2. 武汉生物工程学院生物工程系,湖北,武汉,430415 |
| |
| 基金项目： | 武汉市教育局资助项目 |
| |
| 摘 要： | 采用先降解后固相接枝技术,以马来酸酐（MAH）为单体,在自制的搅拌反应器中制备了马来酸酐接枝聚丙烯接枝物（PP-g-MAH）,并对其结构进行了表征与分析,研究了接枝反应时间、接枝反应温度、引发剂质量分数和单体质量分数对接枝率的影响。结果表明,接枝反应温度为120℃、引发剂质量分数为4%、单体质量分数为14%、接枝反应时间为2.5h时,可得到接枝率为2.85%的PP-g-MAH。
|
| 关 键 词： | 聚丙烯 降解 固相接枝 马来酸酐 |
Study on Solid Phase Grafting of Maleic Anhydride onto Polypropylene |
| |
| YANG Ai-hua,TU Shao-yong,WAN Jing-jing,MA Hong-xia,CHEN Yan.Study on Solid Phase Grafting of Maleic Anhydride onto Polypropylene[J].Chemistry & Bioengineering,2009,26(10):30-32. |
| |
| Authors: | YANG Ai-hua TU Shao-yong WAN Jing-jing MA Hong-xia CHEN Yan |
| |
| Affiliation: | YANG Ai-hua1,TU Shao-yong2,WAN Jing-jing1,MA Hong-xia1,CHEN Yan2(1.Department of Chemistry and Environmental Engineering,Wuhan Bioengineering Institute,Wuhan 430415,China,2.Department of Bioengineering,China) |
| |
| Abstract: | PP-g-MAH was prepared in a solid phase reactor with the technology involving initially degrading polypropylene(PP)and then grafting the resultant with maleic anhydride(MAH).The PP-g-MAH was characterized by FTIR spectroscopy.The effects of grafting reaction time,grafting reaction temperature,initiator mass fraction and MAH mass fraction on grafting rate were studied.The results showed that the grafting rate of 2.85% could be reached under the conditions as follows:grafting reaction time 2.5 h,grafting react... |
| |
| Keywords: | polypropylene degradation solid phase grafting maleic anhydride |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
