测定硅各向异性腐蚀速率分布的新方法

介绍了一种测定硅各向异性腐蚀速率分布的新方法.硅各向异性腐蚀速率三维分布可由一系列晶面上的二维腐蚀速率分布表示.利用深反应离子刻蚀技术(DRIE)在{0mn}硅片上制作出侧壁垂直于硅片表面的矩形槽,测量槽宽度在腐蚀前后的变化,就可测定各{0mn}面上的二维腐蚀速率分布.将二维腐蚀速率分布组合在一起就得到了三维腐蚀速率分布.由于DRIE制作的垂直侧壁深度大,可耐受较长时间的各向异性腐蚀,所以只需使用一般的显微镜就能得到准确的结果.实验得到了40%KOH和25%TMAH中{n10}和{n11}晶面的腐蚀速率分布数据

A Novel Method for Determining theEtch Rate Distributions of Si

A novel method for measuring the anisotropic etch rate distributions of Si is described. A three\|dimensional anisotropic etch rate distribution of Si can be described by two\|dimensional etch rate distributions in a series of crystal planes. Deep reactive ion etching (DRIE) is used for creating rectangular trenches whose sidewalls are perpendicular to the wafer surface in {0 mn } wafers. By measuring the width of the trenches before and after anisotropic etching, two\|dimensional distributions in { 0mn} wafers can be determined. With the two\|dimensional distributions, the three\|dimensional distributions can be determined. As the height of the vertical side walls made by DRIE is high enough to withstand reasonable long time etching, a conventional microscope is accurate enough. Etch rate distributions of { n 10} and {\%n11}\% crystal planes in 40% KOH and 25% TMAH are presented.