首页 | 本学科首页   官方微博 | 高级检索  
     

聚合物光波导放大器材料的光学参数及器件制备
引用本文:张希珍,高强,刘自强,张大明.聚合物光波导放大器材料的光学参数及器件制备[J].光电子.激光,2008,19(6):735-738.
作者姓名:张希珍  高强  刘自强  张大明
作者单位:1. 吉林大学电子科学与工程学院,集成光电子学国家重点联合实验室,吉林,长春,130012;大连理工大学物理与光电工程学院,光子技术研究中心,116024
2. 吉林大学电子科学与工程学院,集成光电子学国家重点联合实验室,吉林,长春,130012
基金项目:国家自然科学基金 , 国家重点基础研究发展计划(973计划) , 新世纪优秀人才支持计划联合资助项目
摘    要:使用甲基丙烯酸甲酯(MMA)和甲基丙稀酸环氧丙酯(GMA)共聚,并加入双酚A环氧脂(bis-phenol-A-epoxy)来调节折射率,制备了无源波导材料.使用铒的配合物ErYb(DBM) 2M和MMA、GMA共聚,再加入双酚A环氧树脂调节折射率,制备了用于光波导放大器有源波导料使用椭偏仪对无源和有源的聚合物薄膜的折射率、消光系数和厚度进行了测量.无源的聚物折射率随着环氧树脂含量的增加而线性增加.铒的配合物共聚进聚合物基质中使1.55 μm波段折射率和消光系数增加.无源和有源波导材料的折射率可调节范围在大约在1.48~1.53厚度可调节范围大约在1~6 μm.用有源聚合物材料作芯层、无源聚合物材料作包层,制备了1.55 μm单模有源波导,并得到了圆形的近场光斑.

关 键 词:聚合物  光波导  折射率  消光系数  椭偏仪  聚合物材料  光波导放大器  光学参数  器件制备  fabrication  device  materials  amplifier  waveguide  polymer  measurement  accurate  parameter  近场光斑  单模  包层  芯层  调节范围  波段  聚合物基质
文章编号:1005-0086(2008)06-0735-04
修稿时间:2007年5月16日

Optical parameter accurate measurement for polymer waveguide amplifier materials and the device fabrication
ZHANG Xi-xhen,GAO Qiang,LIU Zi-qiang,ZHANG Da-ming.Optical parameter accurate measurement for polymer waveguide amplifier materials and the device fabrication[J].Journal of Optoelectronics·laser,2008,19(6):735-738.
Authors:ZHANG Xi-xhen  GAO Qiang  LIU Zi-qiang  ZHANG Da-ming
Affiliation:ZHANG Xi-zhen1,2,GAO Qiang1,LIU Zi-qiang1,ZHANG Da-ming1(1.State Key Laboratory on Integrated Optoelectronics Jilin University Region,College of Electronic Science , Engineering,Jilin University,Changchun 130012,China,2.Photonics Research Center,School of Physics & Optoelectronic Engineering,Dalian University of Technology,Dalian,116024,China)
Abstract:By using polymerizing Methyl Methacrylate(MMA)and Clycidyl Methacrylat(GMA)and adding bisphenol-A epoxy to adjust the refractive index,the passive waveguide material was prepared;By using polymerizing the Erbium complex ErYb(DBM)2MA,Methyl Methacrylate(MMA)and Clycidyl Methacrylat(GMA)and adding bisphenol-A epoxy to adjust the refractive index,the active waveguide material for the waveguide amplifiers was prepared.The refractive index,the extinction coefficient and the thickness of these passive and active ...
Keywords:polymer  optical waveguide  refractive index  extinction coefficient  ellipsometer  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光电子.激光》浏览原始摘要信息
点击此处可从《光电子.激光》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号