首页 | 本学科首页   官方微博 | 高级检索  
     

基于Matlab的共轭平行分度凸轮的分析计算
引用本文:高英,王蕊照,钞红晓,王开政.基于Matlab的共轭平行分度凸轮的分析计算[J].电子设计工程,2012,20(16):28-29,32.
作者姓名:高英  王蕊照  钞红晓  王开政
作者单位:西北机电工程研究所,陕西咸阳,712000
摘    要:针对工程实际应用中的特殊需求,采用全新的曲线轮廓构造方法,利用Matlab仿真计算软件完成了平行分度凸轮的可视化仿真设计,解决了小驱动角平行分度凸轮的参数化设计、分析、计算等一系列问题,大大提高了设计效率。开发的计算程序同样适用于普通平行分度凸轮的设计计算,具有良好的通用性。

关 键 词:平行分度凸轮  驱动角  Matlab仿真  分析

Analysis and calculation of parallel indexing cam based on the Matlab
GAO Ying,WANG Rui-zhao,CHAO Hong-xiao,WANG Kai-zheng.Analysis and calculation of parallel indexing cam based on the Matlab[J].Electronic Design Engineering,2012,20(16):28-29,32.
Authors:GAO Ying  WANG Rui-zhao  CHAO Hong-xiao  WANG Kai-zheng
Affiliation:(Northwest Institute of Mechanical and Electrical Engineering,Xianyang 712000,China)
Abstract:In the traditional parallel indexing cam design process,selection of the drive angle value was relatively large,which is conducive to the structure of the cam curve.This paper discusses the design of parallel indexing cam in the small drive angle,to solve the problem of parallel indexing cam design in some special occasions,with a high reference value.
Keywords:parallel indexing cam  drive angle  Matlab simulation  analysis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号