首页 | 本学科首页   官方微博 | 高级检索  
     

低缺陷Si基碲镉汞分子束外延工艺研究
引用本文:高达,王经纬,王丛,吴亮亮,刘铭.低缺陷Si基碲镉汞分子束外延工艺研究[J].红外,2018,39(10):12-15.
作者姓名:高达  王经纬  王丛  吴亮亮  刘铭
作者单位:华北光电技术研究所,华北光电技术研究所,华北光电技术研究所,华北光电技术研究所,华北光电技术研究所
摘    要:随着焦平面探测器向超大面阵、小像元方向发展,对盲元率尤其连续盲元、均匀性等要求越来越高。材料表面缺陷已经成为抑制Si基碲镉汞分子束外延(Molecular Beam Epitaxial, MBE)技术在更广范围内应用的一个重要因素。通过解决MBE系统束流稳定性、束流测量的精确性和生长温度控制的稳定性共3个MBE生长碲镉汞材料精确控制的关键问题,以及通过正交试验优化生长参数,将Si基碲镉汞材料缺陷密度控制在500 cm-2以内,最优值达到57.83 cm-2

关 键 词:Si基碲镉汞  分子束外延  表面缺陷
收稿时间:2018/9/12 0:00:00
修稿时间:2018/9/25 0:00:00

Study of Low-defect Si-based HgCdTe Molecular Beam Epitaxy Process
Gao D,WANG Jingwei,WANG Cong,WU Liangliang and LIU Ming.Study of Low-defect Si-based HgCdTe Molecular Beam Epitaxy Process[J].Infrared,2018,39(10):12-15.
Authors:Gao D  WANG Jingwei  WANG Cong  WU Liangliang and LIU Ming
Affiliation:North China Research Institute of Electro-Optics,North China Research Institute of Electro-Optics,North China Research Institute of Electro-Optics,North China Research Institute of Electro-Optics,North China Research Institute of Electro-Optics
Abstract:With the development of HgCdTe infrared focal plane arrays toward super-large sizes and small pixels, the requirements of blind pixel rate, especially continuous blind pixel and uniformity, are increasing. The surface defect has become an important factor to inhibit the application of Si-based HgCdTe molecular beam epitaxy (MBE). By solving three key problems of MBE-grown HgCdTe, namely, beam stability, beam measurement accuracy and growth temperature control stability, and by optimizing the growth parameters through orthogonal experiments, the defect density of Si-based HgCdTe materials is controlled within 500 cm-2 and the optimal value is 57.83 cm-2.
Keywords:Si-based HgCdTe  MBE  surface defect
点击此处可从《红外》浏览原始摘要信息
点击此处可从《红外》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号