首页 | 本学科首页   官方微博 | 高级检索  
     

基于CPCI总线的通用FPGA信号处理板的设计
引用本文:王本明,赵前晟,丁海锋,罗丰.基于CPCI总线的通用FPGA信号处理板的设计[J].电子科技,2009,22(10):25-28.
作者姓名:王本明  赵前晟  丁海锋  罗丰
作者单位:西安电子科技大学,雷达信号处理国家重点实验室,陕西,西安,710071
基金项目:总装预研基金资助项目 
摘    要:雷达信号处理的庞大数据量和高实时性要求,决定了雷达信号处理系统的复杂性及设计难度.由于通用信号处理板只需对软件进行升级,从而大大降低了系统设计的时间和成本,因此成为雷达信号处理系统设计的发展趋势.FPGA在实时处理上相对DSP更具优势,更适用于雷达信号处理中.文中采用Altera高端FGPA产品Stratix Ⅲ设计了基于CPCI总线的通用FPGA信号处理板,并实际应用于某雷达系统中.

关 键 词:通用信号处理板  现场可编程门阵列  Stratix  

Design of General FPGA Signal Processing Board Based on CPCI Bus
Wang Benming,Zhao Qiansheng,Ding Haifeng,Luo Feng.Design of General FPGA Signal Processing Board Based on CPCI Bus[J].Electronic Science and Technology,2009,22(10):25-28.
Authors:Wang Benming  Zhao Qiansheng  Ding Haifeng  Luo Feng
Affiliation:Wang Benming,Zhao Qiansheng,Ding Haifeng,Luo Feng(State Key Laboratory of Radar Signal Processing,Xidian University,Xi'an 710071,China)
Abstract:Huge volume of data and high real-time requirement in modern radar signal processing leads to the complexity and difficulty in the design of radar signal processing systems.With a general signal processing board,all one need do is upgrade the software,thus greatly reducing the cost and time of the design.As a result,the general boards of radar signal processing become the trend of design of the radar signal processing system.FPGA is superior to DSP in real-time processing,therefore is more suitable for rada...
Keywords:CPCI
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号