| 链路聚合在MSAP设备上的设计与实现 |
| |
| 引用本文： | 王小玫.链路聚合在MSAP设备上的设计与实现[J].电视技术,2013,37(9). |
| |
| 作者姓名： | 王小玫 |
| |
| 作者单位： | 武汉邮电科学研究院光纤通信技术和网络国家重点实验室,湖北武汉,430074 |
| |
| 摘 要： | 在多业务接入平台(MSAP)设备业务板卡本身不具备链路聚合功能的情况下,提出手工链路聚合在MSAP设备上的完整实现方案,业务卡的业务通过SPI总线汇聚到汇聚卡,利用汇聚卡中的Marvell6097芯片实现手工链路聚合功能,各业务卡的业务通过汇聚卡的两个千兆口输出.经验证,该功能有效增加了链路带宽,提高了链路可靠性.
|
| 关 键 词： | MSAP 链路聚合 链路带宽 链路可靠性 |
| 收稿时间： | 8/8/2012 12:00:00 AM |
| 修稿时间： | 2012/8/27 0:00:00 |
Design and Implementation of Link Aggretation in MSAP |
| |
| wangxiaomei.Design and Implementation of Link Aggretation in MSAP[J].Tv Engineering,2013,37(9). |
| |
| Authors: | wangxiaomei |
| |
| Affiliation: | Wuhan Research Institute of Post and Telecommunications |
| |
| Abstract: | While the service card in MSAP equiments has no function of Link Aggregation, this paper put forwards an entire solution implementation to realize the Link Aggregation by manual. The services are gathered to gathering card by SPI bus. The services are output from the two gigabit ports, utilizing the manual Link Aggregation function of Marvell6097 chip in gathering card. It has been comfirmed by experiments that the function can effectively increase bandwidth and improve link reliability. |
| |
| Keywords: | MSAP link aggregation link bandwidth link reliability |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《电视技术》浏览原始摘要信息 |
|
点击此处可从《电视技术》下载全文 |
|
