Towards providing optimal energy‐efficiency and throughput for IEEE 802.11 WLANs

IEEE 802.11 wireless network standard has become one of the most used wireless networking technologies for smart devices as it offers mobility support and low cost deployment. However, these devices deeply rely on the energy provided by their batteries, which results in limited running time. IEEE 802.11 network standard provides stations with carrier sense multiple access with collision avoidance for the medium access. Yet it results in stations to consume an important amount of power. Therefore, minimizing WiFi‐based energy consumption in smart devices has been received substantial attention in both academia and industry. Accordingly, this paper * proposes a novel beacon‐based energy‐efficient collision‐free medium access control protocol for any type of IEEE 802.11 stations, regardless of being stationary or mobile, or having different amount of traffic flow, transmission rates, or traffic types. The proposed scheme is valid for all types of low or wide bandwidth, single or multiuser multiple‐input multiple‐output WLAN channels, such as IEEE 802.11a\b\g\n\ac. In the proposed scheme, energy saving is achieved, enabling stations to transmit on the right time and maintaining stations in the doze state during a predetermined sleep_time interval after each successful frame transmission, by making use of modified control and management frames of the standard IEEE 802.11 protocol. The proposed scheme reduces the probability of collisions and may allow stations to enter the collision‐free state, regardless of the number of stations on the channel and their traffic types. Widespread simulations have been executed to validate the efficiency of the proposed method. The results demonstrate that the proposed method significantly increases overall throughput and reduces power consumption of stations over IEEE 802.11 WLANs.