| 基于倾斜油罐容表的校正与建模 |
| |
| 引用本文： | 原杰,吕鹏举,王晓霞.基于倾斜油罐容表的校正与建模[J].现代电子技术,2011(24):121-122,126. |
| |
| 作者姓名： | 原杰 吕鹏举 王晓霞 |
| |
| 作者单位： | 哈尔滨医科大学(大庆校区)医学信息学系; |
| |
| 摘 要： | 该问题的研究使用了具有对称性的空间体的特性以及微分的思想,首先求出无变位时卧式罐中的油量关于测得油面高度的公式。然后基于等效置换的思想,通过求得变位发生后所测得的油面高度转换到等油量下无变位时所对应的油面高度的关系,再利用无变位时卧式罐中的油量关于测得油面高度的公式计算出油量。在验证完上述两种情况下数学模型的有效性后利用它们计算出无变位和变位发生后所对应的罐容表。
|
| 关 键 词： | 卧式罐 油面高度 变位 建模 |
Calibration and Modeling of Capacity Table Based on Tilted Oil Tank |
| |
| YUAN Jie,L Peng-ju,WANG Xiao-xia.Calibration and Modeling of Capacity Table Based on Tilted Oil Tank[J].Modern Electronic Technique,2011(24):121-122,126. |
| |
| Authors: | YUAN Jie L Peng-ju WANG Xiao-xia |
| |
| Affiliation: | (Department of Medical Information,Daqing Campus of Harbin Medical University,Daqing 163319,China) |
| |
| Abstract: | The characteristics of symmetrical space objects and the method of differential are used in this research.The amount in a horizontal storage tank is obtained by using a formula of measuring the oil-level height.Then based on the method of equivalent replacement,the amount of oil storage in a tilted oil tank is transformed into the oil-level height in an horizontal storage tank without the amount change.Finally,the amount of oil in an oil-storage tank with displacement can be obtained by using the amount of ... |
| |
| Keywords: | horizontal tank oil-level height displacement modeling |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
