首页 | 本学科首页   官方微博 | 高级检索  
     

基于启发式遗传算法求解加工时间可控单台机器
引用本文:仇超,徐志成. 基于启发式遗传算法求解加工时间可控单台机器[J]. 现代电子技术, 2011, 34(20): 85-89
作者姓名:仇超  徐志成
作者单位:常州机电职业技术学院,江苏常州,213164
基金项目:国家自然科学基金资助项目(60421002;70471052)
摘    要:对NP—Hard的加工时间可控单机排序问题提出一种启发式遗传算法求解其次优解。在介绍该问题数学模型后,利用二维编码描述加工次序与加工时间,染色体的第一行用整数编码来表示工件加工次序,染色体第二行用实数编码表示实际加工时间。根据启发式知识定义了新的交叉与变异操作,这样不仅容易产生优良的初始解,而且缩小了搜索范围,提高了搜索速度和精度。算例仿真研究验证了提出算法的有效性。

关 键 词:NP-Hard  加工时间可控  启发式  遗传算法  二维编码

Solusion of Processing Time for Single Machine Scheduling Control Based on Heuristic Genetic Algorithm
QIU Chao,XU Zhi-cheng. Solusion of Processing Time for Single Machine Scheduling Control Based on Heuristic Genetic Algorithm[J]. Modern Electronic Technique, 2011, 34(20): 85-89
Authors:QIU Chao  XU Zhi-cheng
Affiliation:QIU Chao,XU Zhi-cheng(Changzhou Institute of Mechatronic Technology,Changzhou 213164,China)
Abstract:The heuristic Genetic algorithm is presented for solving the problem of processing time control of the NP-hard single machine.The mathematic model is introduced.The two dimensional coding method is proposed to describe the job time sequence and actual processing time.Based on heuristic knowledge,the new crossover and mutation operations of GA are defined.The heuristic GA not only can start with better initial solusion,but also can make the solution more precise and faster.The simulation results show that th...
Keywords:NP-hard  processing time control  heuristic genetic algorithm  two-dimensional coding  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号