首页 | 本学科首页   官方微博 | 高级检索  
     

振动基座下光纤陀螺信号消噪方法对比研究
引用本文:李佳桐,张春熹,张指挥,薛龙生,徐雪洁.振动基座下光纤陀螺信号消噪方法对比研究[J].现代电子技术,2014(4):156-158,162.
作者姓名:李佳桐  张春熹  张指挥  薛龙生  徐雪洁
作者单位:[1] 北京航天航空大学 仪器科学与光电工程学院,北京,100083 [2] 中国人民解放军61135部队,北京,102211 [3] 中国人民解放军95801部队,北京,100076
摘    要:为了减小动态环境下光纤陀螺信号的随机误差,采取振动试验对光纤陀螺的动态误差进行激发,通过对试验数据的Allan方差分析,得到了振动过程中光纤陀螺信号随机误差的变化特性。采用基于AR(2)模型的Kalman滤波方法和小波滤波方法对光纤陀螺信号进行消噪处理,分析结果显示上述两种方法都能够有效地消除振动基座下FOG信号的随机误差,并且小波滤波方法要优于Kalman滤波方法。

关 键 词:振动基座  Allan方差分析  Kalman滤波  小波滤波  消噪

Contrast and study on de-noising methods for FOG signals under condition of vibrating base
LI Jiatong,ZHANG Chunxi,ZHANG Zhihui,XUE Longsheng,XU Xuejie.Contrast and study on de-noising methods for FOG signals under condition of vibrating base[J].Modern Electronic Technique,2014(4):156-158,162.
Authors:LI Jiatong  ZHANG Chunxi  ZHANG Zhihui  XUE Longsheng  XU Xuejie
Affiliation:LI Jiatong, ZHANG Chunxi, ZHANG Zhihui, XUE Longsheng, XU Xuejie
Abstract:In order to reduce the random error of FOG signal in dynamic environment,a vibration test was done to arouse the dynamic error of FOG. The change characteristics of random error of FOG signal in vibration process was got by means of the Allan variance analysis of the test data. Kalman filtering method based on the AR(2) model and wavelet filtering method were used to execute the de-noising of the FOG signal. The analysis results show that both of the methods can eliminate the ran-dom error of the FOG signal under the condition of vibrating base effectively and the wavelet filtering method is better than Kal-man filtering method.
Keywords:vibrating base  Allan variance analysis  Kalman filtering  wavelet filtering  de-noising
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号