首页 | 本学科首页   官方微博 | 高级检索  
     

提高声光调Q光纤激光器输出功率的关键因素分析
引用本文:黄琳,刘永智,代志勇.提高声光调Q光纤激光器输出功率的关键因素分析[J].光电子技术与信息,2006,19(2):30-34.
作者姓名:黄琳  刘永智  代志勇
作者单位:电子科技大学光电信息学院,四川,成都,610054
摘    要:声光调Q光纤激光器具有所需驱动调制电压很低,容易实现对连续激光调Q获得高重复频率脉冲输出的特点。介绍丁声光调Q光纤激光器的原理,并对影响它性能的几个重要因素如自发辐射的放大、泵浦功率和速率、光纤的选择、声光Q开关的重复频率等主要因素做理论分析,提出了优化这些因素的方法。

关 键 词:光纤激光器  声光调Q光纤激光器  低数值孔径大模场光纤  自发辐射的放大  声光开关
文章编号:1006-1231(2006)02-0030-05
收稿时间:2005-03-28
修稿时间:2005年3月28日

Critical Characteristics of Increasing the Output Power of AOM Q-switched Fiber Laser
HUANG Lin,LIU Yong-zhi,DAI Zhi-yong.Critical Characteristics of Increasing the Output Power of AOM Q-switched Fiber Laser[J].Optoelectronic Technology & Information,2006,19(2):30-34.
Authors:HUANG Lin  LIU Yong-zhi  DAI Zhi-yong
Affiliation:School of Optoelectronic Information, University of Electronic Science Technology, Chengdu 610054, China
Abstract:The AOM Q-switched fiber laser is modulated by low voltage, so it can abtain high-power pulse with high repetition by Q- switching continous-wave. The principle of AOM Q- switched fiber laser was introduced. The key factors which affect its performances were theoretically analyzed, such as amplification of spontaneous emission, the power and rate of pump, the choices of fibers, the repetition rate of acousto-optic modulator and so on. The methods that can optimize these factors were given.
Keywords:fiber laser  AOM Q-switched fiber laser  low numerical aperture large mode area fiber  amplification of spontaneous emission  acousto-optic modulator
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号