首页 | 本学科首页   官方微博 | 高级检索  
     

一种用于高功率光纤放大器的侧面抽运耦合器
引用本文:黄榜才,张鹏,段云峰,宁鼎.一种用于高功率光纤放大器的侧面抽运耦合器[J].中国激光,2008,35(s2):155-157.
作者姓名:黄榜才  张鹏  段云峰  宁鼎
作者单位:黄榜才:中国电子科技集团公司第四十六研究所, 天津 300220
张鹏:中国电子科技集团公司第四十六研究所, 天津 300220
段云峰:中国电子科技集团公司第四十六研究所, 天津 300220
宁鼎:中国电子科技集团公司第四十六研究所, 天津 300220
基金项目:国家自然科学基金(10674074)和天津自然科学基金(06YFJZJC00300)资助课题。
摘    要:报道了一种应用于高功率光纤放大器的侧面抽运耦合器。采用熔融拉锥工艺以及最基本的2×1耦合方式, 实现了高耦合效率、高隔离度的光纤侧面耦合器的研制。通过对多种不同光纤组合的研究, 发现采用外径125 μm, 数值孔径为0.46的无源双包层光纤做信号传输光纤和抽运耦合光纤, 可获得高达74%的抽运耦合效率; 耦合器信号光通过率为95%; 信号输入端与抽运输入端的隔离度大于50 dB; 抽运输入端对输出端反向传输光的隔离度 为20 dB。采用该侧面耦合器, 实现了输出功率达1 W的窄线宽全光纤放大器。

关 键 词:光纤光学  耦合器  侧面抽运  高功率

A Side-Pump Fiber Coupler for High-Power Fiber Amplifiers
Abstract:A kind of side-pump fiber coupler for high-power fiber amplifiers is reported. Using the fused taper technics and a basic 2x1 coupling method, the side-pump fiber coupler of high coupling efficiency and high isolation was realized. Through the investigation of different fibers of the side-pump fiber couplers, the double-clad fiber with outside diameter 125 μm and numerical aperture(NA)0.46 was the best selection for the signal transmission and pump launched fiber. The side-pump fiber coupler integrating a 74% pump coupling efficiency, 95% signal transmission, with exceeding 50dB isolation between the signal input end and pump-light input end and 20 dB isolation between the pump-light input end and the signal output end was obtained. Using the side-pump fiber coupler, the narrow line-width all-fiber amplifier with an output power exceeding 1W was demonstrated.
Keywords:fiber optics  coupler  side-pump  high power
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号