首页 | 本学科首页   官方微博 | 高级检索  
     

杂质吸收对光子晶体滤波器设计的影响
引用本文:刘启能.杂质吸收对光子晶体滤波器设计的影响[J].激光技术,2008,32(3):327-327.
作者姓名:刘启能
作者单位:1.重庆工商大学 理学院, 重庆 400067
摘    要:为了研究杂质的吸收对光子晶体滤波器设计的影响,引入复折射率并利用特征矩阵法,计算了滤波透射峰的峰值和半峰全宽。滤波透射峰的峰值随杂质的消光系数增加而迅速减小,滤波通道透射峰的半峰全宽随消光系数增加而增大,滤波透射峰的峰值和半峰全宽都随吸收杂质的光学厚度的增加而减小。结果表明,设计光子晶体滤波器时,必须考虑杂质吸收这一重要因素,应选择消光系数小于0.002的掺杂材料,并且杂质的光学厚度应设计在2(λ0/4)左右。

关 键 词:材料    光子晶体    滤波器    缺陷模    消光系数
文章编号:1001-3806(2008)03-0327-03
收稿时间:2007-03-06
修稿时间:2007年3月6日

Effect of Absorption of Doping on The Design of Filter of Photonic Crystal
LIU Qi-neng.Effect of Absorption of Doping on The Design of Filter of Photonic Crystal[J].Laser Technology,2008,32(3):327-327.
Authors:LIU Qi-neng
Affiliation:LIU Qi-neng(Science College,Chongqing Technology , Business University,Chongqing 400067,China)
Abstract:In order to study the effect of dopant absorption on photonic crystal filters,the peak transmissivity and full width at half maxmum(FWHM) of the filters were calculated based on the complex refractive index and the characteristic matrix.It was found that the peak transmissivity decreased with the increment of the extinction coefficient,however the FWHM increased with the increment of the extinction coefficient.Both the peak transmissivity and the FWHM decreased with the increment of the optical thickness of...
Keywords:materials  photonic crystal  filter  defect mode  extinction coefficient  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号