109.5W输出1.94μm波长Tm:YAP固体激光器 |
| |
引用本文: | 苑利钢,周寿桓,赵鸿,陈国,魏磊,李宝,王克强.109.5W输出1.94μm波长Tm:YAP固体激光器[J].红外与激光工程,2019,48(4):405006-0405006(8). |
| |
作者姓名: | 苑利钢 周寿桓 赵鸿 陈国 魏磊 李宝 王克强 |
| |
作者单位: | 1.华北光电技术研究所 固体激光技术重点实验室,北京 100015 |
| |
基金项目: | 国家预先研究课题(51302010306) |
| |
摘 要: | 报道了一种高功率Tm:YAP激光器实验装置,采用b轴切割的YAP/Tm:YAP/YAP复合晶体作为激光增益介质,使用中心波长为795 nm的LD模块进行双端泵浦,当增益介质冷却温度为20℃,LD总泵浦功率为301.4 W时,获得了最高109.5 W的1.94 m波长线偏振激光输出,光-光转换效率约为36.3%,斜率效率约为45.8%,在此输出功率条件下测得光束质量M2因子为3.8。
|
关 键 词: | 1.94μm激光器 端面泵浦 LD泵浦 高功率 Tm:YAP |
收稿时间: | 2019-02-13 |
109.5 W output 1.94 micron Tm:YAP solid-state laser |
| |
Affiliation: | 1.Science and Technology on Solid-State Laser Laboratory,North China Research Institute of Electro-Optics,Beijing 100015,China |
| |
Abstract: | A high power Tm:YAP laser device was reported. The laser gain medium was b-axis-cut YAP/Tm:YAP/YAP composite crystal rod. By using a LD module with a center wavelength of 795 nm for double-end pumping, when the temperature of the cooling water was set at 20℃, and the total pump power was 301.4 W, the linear polarized laser output of 1.94 m with a maximum of 109.5 W was obtained. The optical-to-optical conversion efficiency was up to 36.3% and the slope efficiency was about 45.8%, the measured beam quality of M2 factor was 3.8 at the highest output power condition. |
| |
Keywords: | |
|
| 点击此处可从《红外与激光工程》浏览原始摘要信息 |
|
点击此处可从《红外与激光工程》下载全文 |
|