Control-faced dynamics with deformation compatibility for a 5-DOF active over-constrained spatial parallel manipulator 6PUS–UPU |
| |
| Affiliation: | 1. Resident, Division of Podiatric Surgery, University of Cincinnati Medical Center, Cincinnati, OH;2. Surgeon, Division of Podiatric Surgery, University of Cincinnati Medical Center, Cincinnati, OH;3. Surgeon, Department of Orthopaedics, Russian Ilizarov Scientific Center for Restorative Traumatology and Orthopaedics, Kurgan, Russia |
| |
| Abstract: | Taking into account the effect of structural compliance, inverse dynamics of the active over-constrained parallel manipulator 6PUS–UPU with five degrees of freedom is solved in this article. Firstly, the relationship between driving forces and actuated force screws of each limb is derived. Then the coordination of elastic deformation between limbs which consider the effect of gravity and inertia is acquired. Finally the unique solution of driving forces for the active over-constrained parallel manipulator is derived by incorporating the force equilibrium equation of the moving platform. To validate the theoretical derivation, dynamics simulation model of manipulator based on rigid–flexible mixed structure is shown and numerical examples are given. Comparison with the traditional method of dynamics based on pseudo-inverse is also made. Finally, a feasible experimental method, as an effective test to the theoretical calculation, is proposed and applied on the prototype. |
| |
| Keywords: | Active over-constrained Redundantly actuated Dynamics Deformation compatibility Rigid–flexible mixed model Position–force hybrid control |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
