首页 | 本学科首页   官方微博 | 高级检索  
     

用于M-BUS协议的一种新型电流调制电路
引用本文:李杰,徐东明,赵新毅.用于M-BUS协议的一种新型电流调制电路[J].中国集成电路,2013,22(5):37-40.
作者姓名:李杰  徐东明  赵新毅
作者单位:1. 西安邮电大学通信与信息工程学院,陕西西安,710061
2. 西安深亚电子有限公司,陕西西安,710061
摘    要:M-BUS(仪表总线)通信协议是用于智能仪表、控制设备的远程通信总线标准,近几年在国内外都有相当快速的发展。本文根据仪表总线通信协议设计了一种新型电流调制电路,用于仪表总线通信网络中的从机远程供电,在不改变M-BUS总线系统容量的情况下,在不改变M-BUS总线系统硬件设备的前提下,可使得终端设备的远程供电能力由原来的小于3mA增加到18mA,为短时间终端设备的远程供电,驱动大负载设备的应用提供可能。

关 键 词:M-BUS  电流调制  远程供电  大负载驱动

A new current modulation circuit used in M-BUS protocol
LI Jie , XU Dong-ming , ZHAO Xin-yi.A new current modulation circuit used in M-BUS protocol[J].China Integrated Circuit,2013,22(5):37-40.
Authors:LI Jie  XU Dong-ming  ZHAO Xin-yi
Affiliation:1.College of Communication and Information Engineering, an University of Posts and Telecommunications, Xi'an 710061 , China; 2.Xi' an Supermicro Electronics Co., LTD , Xi' an 710061 , China)
Abstract:The M-BUS ( meter bus ) communication protocol is a remote communication bus for intelligent instruments and control equipments, In recent years it got a fairly rapid development at home and abroad. According to the M-BUS communication protocol, a new current modulation circuit is designed in this paper, This circuit is used in the remote power supply to slave of the M-BUS communication networks,Under the situation of no change the M-BUS system capacity and system hardware equipments, it is usable for terminal equipments remote power supply ability increasing from less-than 3mA to 18mA, in order to realizing terminal equipments remote power supply in short time, driving heavy load application.
Keywords:M-BUS  Current Modulation  Remote Power Supply  Heavy Load Drive
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号