首页 | 本学科首页   官方微博 | 高级检索  
     

应用四杆靶图像测量热成像系统焦距
引用本文:孙军月,马冬梅,霍玉波.应用四杆靶图像测量热成像系统焦距[J].红外技术,2006,28(4):220-223.
作者姓名:孙军月  马冬梅  霍玉波
作者单位:中国科学院长春光学精密机械与物理研究所,吉林,长春,130033
摘    要:采用实验室中四杆靶红外目标源,使其成像在热成像系统自身的焦面探测器上,采用放大倍率法测量与计算出系统的焦距.由于热成像系统的探测器像元尺寸一般较CCD像元大,为了降低像元尺寸对测量精度的影响,根据误差理论,合理选择四杆靶目标,使其能够达到满意的测试精度.这种焦距测量方法,原理简单直接,测量范围大,对于热成像系统的检测与装调,有着很好的实际应用价值.文中详细分析了影响焦距测量不确定度的因素,焦距的测量扩展不确定度可达到U=0.4%.

关 键 词:焦距  四杆靶图像  放大倍率法  热成像系统
文章编号:1001-8891(2006)04-0220-04
收稿时间:2005-09-01
修稿时间:2005-09-01

The Focal Length Measurement of Thermal Imaging System by 4-bar Targets
SUN Jun-yue,MA Dong-mei,HUO Yu-bo.The Focal Length Measurement of Thermal Imaging System by 4-bar Targets[J].Infrared Technology,2006,28(4):220-223.
Authors:SUN Jun-yue  MA Dong-mei  HUO Yu-bo
Affiliation:ChangChun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Jilin ChangChun 130033, China
Abstract:The focal length of a thermal imaging system was assessed by the magnification method using 4-bar targets as infrared objectives. However, the detector pitch is larger than that of CCD detector and limits the measurement accuracy. In order to improve the accuracy, appropriate 4-bar targets are chosen according to academic calculation. The uncertainty effects in measurement was analyzed and the uncertainty in measurement can reach U = 0.4%.
Keywords:Focal length  4-bar image  Magnification method  Thermal imaging system
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号