首页 | 本学科首页   官方微博 | 高级检索  
     

镁基金属复合材料表面激光熔覆铜合金研究
引用本文:胡乾午,杨泰平,李志远,刘顺洪,T.M.Yue. 镁基金属复合材料表面激光熔覆铜合金研究[J]. 应用激光, 2001, 21(4): 247-250
作者姓名:胡乾午  杨泰平  李志远  刘顺洪  T.M.Yue
作者单位:1. 华中科技大学材料学院,武汉 430074
2. 香港理工大学制造工程系
摘    要:采用喷涂铜合金的两步法工艺,用2kW-NdYAG激光对Mg-SiC复合材料进行了激光熔覆,熔覆后表层的Cu60Zn40合金与Mg-SiC基体熔合良好.激光熔覆试样相对腐蚀电动势Ecorr比未处理提高3.7倍,其相对腐蚀电流密度icorr低约22倍,激光熔覆Cu60Zn40层可以显著提高Mg-SiC复合材料的耐蚀性.

关 键 词:镁基合金 金属基复合材料 激光熔覆 铜合金耐腐蚀
修稿时间:2000-04-17

Studyon Laser Cladding of Copper Alloy on Mg-based Metal Matrix Composite
Hu Qianwu Yang Taiping Liu Shunhong Li Zhiyuan T.M.Yue. Studyon Laser Cladding of Copper Alloy on Mg-based Metal Matrix Composite[J]. Applied Laser, 2001, 21(4): 247-250
Authors:Hu Qianwu Yang Taiping Liu Shunhong Li Zhiyuan T.M.Yue
Abstract:Laser cladding on Mg-SiC composite by means of the two step process of spraying copper alloy with the 2kW-Nd:YAG laser was studied The fusion joints between the Cuo60Zn40 alloys and the Mg-SiC bulks were good one after laser cladding. The relative corrosion potential E corr of the laser cladding samples were three point seven times higher than That of the untreated samples,The relative corrosion current density i corr of the laser cladding samples,on the basis that were twenty two times lower than the value of the untreated samples.Laser cladding of Cu60Zn40 layers can increase the corrosion resistance of the Mg-SiC composites significantly.
Keywords:Mg-based alloy  metal matrix composite  laser cladding  copper alloy  corrosion resistance  
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号