首页 | 本学科首页   官方微博 | 高级检索  
     

用于802.11b发射通道的重构滤波器
引用本文:高小平,何济柔,黄煜梅,洪志良.用于802.11b发射通道的重构滤波器[J].固体电子学研究与进展,2007,27(2):264-268.
作者姓名:高小平  何济柔  黄煜梅  洪志良
作者单位:复旦大学张江校区专用集成电路与系统国家重点实验室,上海,201203
摘    要:提出了一种满足IEEE802.11b标准发射机的低功耗高线性度ChebyshevI型低通滤波器的设计并已实现。该滤波器建立在高增益带宽积运放的基础上,采用Leapfrog结构,最大程度地减小元件值、温漂和工艺容差对滤波器性能的影响,同时采用Opamp-RC技术提高了电路的动态范围和线性度。该滤波器用0.18μmCMOS实现,所占芯片面积为0.58mm×0.5mm,通过测试基本上达到系统提出的指标。该电路在1.8V的工作电压下,共消耗4.4mA电流。

关 键 词:无线局域网  802.11b  滤波器  Opamp-RC  温度漂移  工艺容差
文章编号:1000-3819(2007)02-264-05
修稿时间:2006年6月19日

A Reconstruction Opamp-RC Filter Used in Transmitter of WLAN 802.11 b
GAO Xiaoping,HE Jirou,HUANG Yumei,HONG Zhiliang.A Reconstruction Opamp-RC Filter Used in Transmitter of WLAN 802.11 b[J].Research & Progress of Solid State Electronics,2007,27(2):264-268.
Authors:GAO Xiaoping  HE Jirou  HUANG Yumei  HONG Zhiliang
Abstract:A low-power high linearity ChebyshevI LPF is described,which is built in a high gain-bandwidth opamp,adoptting Leapfrog structure to minimize the sensitivity to devices' value which can be seriously affected by temperature derivation and process tolerance.Also it has used Opamp-RC technique to enhance the dynamic range of handled signal and the linearity of LPF.It is designed for 802.11 b wireless LAN application and has been implemented in 0.18 μm CMOS process.The whole die is 0.58 mm×0.5 mm.Test results show that performance of this LPF can meet requirement proposed by system.This circuit consumes 4.4 mA of current from a 1.8 V supply totally.
Keywords:WLAN  802  11 b  filter  Opamp-RC  temperature drift  process tolerance
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号