首页 | 本学科首页   官方微博 | 高级检索  
     


Floatability of chalcopyrite and molybdenite in the presence of lignosulfonates. Part II. Hallimond tube flotation
Affiliation:1. College of Resources and Civil Engineering, Northeastern University, Shenyang 110004, China;2. Faculty of Resource and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China;1. School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, Hubei, China;2. College of Science and Engineering, Flinders University, Bedford Park, Adelaide 5042, Australia;1. College of Resources and Metallurgy, Guangxi University, Nanning 530004, China;2. College of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China;3. Key Laboratory of Chemical and Biological Transformation Process of Guangxi Higher Education Institutes, School of Chemistry and Chemical Engineering, Guangxi University for Nationalities, Nanning 530006, China;1. National Engineering Research Center of Coal Preparation and Purification, Xuzhou 221116, Jiangsu, China;2. College of Mining Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China;3. School of Chemical Engineering and Technology, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China;4. Henan Province Industrial Technology Research Institute of Resources and Materials, Zhengzhou University, Zhengzhou 450001, Henan, China;1. Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan;2. Department of Earth Resources Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
Abstract:The effect of six lignosulfonates on the Hallimond tube flotation of chalcopyrite and molybdenite was studied as a function of pH, with the use of common pH modifiers (soda ash, potassium hydroxide, and lime). By comparing the flotation results with the adsorption data collected in Part I of this contribution, it becomes evident that the depression of chalcopyrite flotation takes places only when lignosulfonates adsorb on the mineral surface and, at the same time, a fraction of the xanthate collector is desorbed from the mineral surface. These two conditions are met only at high pH adjusted with lime. The depression of the natural floatability of molybdenite is relatively easy using all six lignosulfonates, but once the mineral is rendered strongly hydrophobic by the addition of an oily collector (dodecane), the depression of molybdenite by lignosulfonates is very difficult and only calcium lignosulfonates, and the highest molecular weight sodium salt, produce significant levels of depression. Overall, the results suggest that it is possible to selectively float chalcopyrite from molybdenite using lignosulfonates by depressing molybdenite. This can be achieved over a wide pH range provided that a pH modifier other than lime is used for pH control. Although the results showed that chalcopyrite flotation and molybdenite depression can be achieved under similar physicochemical conditions, further tests with real ores under industrial conditions have to be carried out with particular attention to the effect of process water quality.
Keywords:
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号