首页 | 本学科首页   官方微博 | 高级检索  
     

TiN/ZrN抗冲蚀多层膜制备及其性能研究
引用本文:吕亮,余志明.TiN/ZrN抗冲蚀多层膜制备及其性能研究[J].材料研究与应用,2016,10(1):28-32.
作者姓名:吕亮  余志明
作者单位:1. 中南大学 材料科学与工程学院,湖南 长沙 410083; 中国南方航空工业 集团 有限公司,湖南 株洲412000;2. 中南大学 材料科学与工程学院,湖南 长沙,410083
摘    要:采用多靶位真空阴极电弧离子镀技术在1 Cr17 Ni2不锈钢表面沉积抗冲蚀 TiN/ZrN 多层膜,利用扫描电镜、显微硬度计、划痕仪、冲刷试验机和中性盐雾试验机等对多层膜的结构及性能进行研究.结果表明:所制备的TiN/ZrN多层膜厚度为5.24μm,膜层与基体结合力为55 N,显微硬度为HK2026.6;多层膜对不锈钢基体起到了良好的防护作用,耐90°攻角冲刷砂量为50 g,耐中性盐雾腐蚀96 h 无腐蚀,336 h抗腐蚀性能大于9级.

关 键 词:TiN/ZrN多膜层  抗冲蚀  真空阴极电弧离子镀

Preparation and properties of TiN/ZrN anti-erosion multilayer coatings
LV Liang,YU Zhiming.Preparation and properties of TiN/ZrN anti-erosion multilayer coatings[J].Journal of Guangdong Non-Ferrous Metals,2016,10(1):28-32.
Authors:LV Liang  YU Zhiming
Abstract:The TiN/ZrN multilayers coatings were deposited by vacuum cathodic arc deposition method. Using scanning electron microscopy (SEM),microhardness tester,scratch tester,erosion tester and neutral spray tester are used to study the structure and performance of the coating.The results show that the TiN/ZrN multilayer coatings with thickness of 5.24μm exhibit the higher hardness (2026.6HK)and binding force (55N).The coating has played a good role in protection of the substrate.The film is resistant to 90° solid particle impingement erosion amount of 50g sands.In neutral salt spray corrosion tests through 96 hours non-corrosive occur,and 336 hours of corrosion resistance is greater than level 9.
Keywords:TiN/ZrN  erosion resistance  vacuum cathodic arc ion plating
本文献已被 万方数据 等数据库收录!
点击此处可从《材料研究与应用》浏览原始摘要信息
点击此处可从《材料研究与应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号