首页 | 本学科首页   官方微博 | 高级检索  
     

等离子喷涂Al2O3涂层的介电性能
引用本文:曾威,邓春明,刘敏,邓畅光,朱晖朝.等离子喷涂Al2O3涂层的介电性能[J].材料研究与应用,2011,5(4):275-278.
作者姓名:曾威  邓春明  刘敏  邓畅光  朱晖朝
作者单位:广东省工业技术研究院(广州有色金属研究院),广东广州,510650
摘    要:采用大气等离子喷涂制备厚度大于1.0mm的氯化铝涂层,分别对涂层的显微结构、相组成及氧化铝涂层的介电性能进行了表征,并对氧化铝涂层的击穿失效机理进行了探讨.结果表明,等离子喷涂氧化铝涂层为层状结构,以多孔的γ-Al2O3为主晶相,其体积电阻率、击穿电压均明显低于烧结氯化铝块材,涂层的介电失效是由电晕放电击穿和热击穿共同作用而致.

关 键 词:大气等离子喷涂  氧化铝涂层  介电性能

Dielectric properties for plasma sprayed alumina coating
ZENG Wei,DENG Chunming,LIU Min,DENG Changguang,ZHU Huichao.Dielectric properties for plasma sprayed alumina coating[J].Journal of Guangdong Non-Ferrous Metals,2011,5(4):275-278.
Authors:ZENG Wei  DENG Chunming  LIU Min  DENG Changguang  ZHU Huichao
Affiliation:Guangdong Research Institute of Industrial Technology(Guangzhou Research Institute of Non-ferrous Metals),Guangzhou 510650,China
Abstract:Microstructure,phase composition and dielectric property of the air plasma sprayed alumina coating with a coating thickness over 1.0 mm were characterized,and the breakdown failure mechanism of alumina coating was discussed.The results show that the plasma sprayed alumina coating,with γ-Al2O3 as the predominant crystal phase,presents laminar microstructure,and its volume resistivity and breakdown voltage are far lower than those of the bulk alumina sintered.And the dielectric failure of plasma sprayed alumina coating is caused by both corona discharge breakdown and thermal breakdown.
Keywords:air plasma spray  alumina coating  dielectric properties
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《材料研究与应用》浏览原始摘要信息
点击此处可从《材料研究与应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号