| 修正齿侧面提高插齿刀精度的研究 |
| |
| 引用本文： | 李铬.修正齿侧面提高插齿刀精度的研究[J].煤矿机电,2006(4):21-22,25. |
| |
| 作者姓名： | 李铬 |
| |
| 作者单位： | 中原工学院,河南,郑州,450007 |
| |
| 摘 要： | 在分析渐开线螺旋面插齿刀存在缺点的基础上,讨论了这种插齿刀的精度对被加工齿形产生误差的原因,通过对插齿刀二阶母面的数学描述,得出齿侧面的修正方法,只需对齿侧面精磨工序加以改变,即可制造出高精度的插齿刀。
|
| 关 键 词： | 插齿刀 齿侧面 修正 |
| 文章编号： | 1001-0874（2006）04-0021-03 |
| 收稿时间： | 2006-04-04 |
| 修稿时间： | 2006-04-04 |
Research of Raising Preciseness of Gear Shaper by Correcting Flank of Gear |
| |
| LI Ge.Research of Raising Preciseness of Gear Shaper by Correcting Flank of Gear[J].Colliery Mechanical & Electrical Technology,2006(4):21-22,25. |
| |
| Authors: | LI Ge |
| |
| Affiliation: | Zhongyuan Institute of Technology, Zhengzhou 450007, China |
| |
| Abstract: | On the base of analyzing the defects of involute helical gear shaper, the paper discusses the cause of error on the profile of gear by the preciseness of this gear shaper and concludes a correcting method of flank of gear. In this way, as long as the delicate grinding process of flank of gear is changed that the gear shaper with high preciseness can be produced. |
| |
| Keywords: | gear shaper flank of gear correct |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
