首页 | 本学科首页   官方微博 | 高级检索  
     

氧化铜钴精矿浸出试验研究
引用本文:周韫,廖乾,解振朝,程建国,李淮湘.氧化铜钴精矿浸出试验研究[J].矿冶工程,2016(6).
作者姓名:周韫  廖乾  解振朝  程建国  李淮湘
作者单位:长沙矿冶研究院有限责任公司,湖南 长沙,410012
摘    要:以硫酸为浸出剂,针对某含铜5.75%、含钴0.34%、以铜计氧化率为78.96%的氧化铜钴精矿进行了浸出工艺研究。结果表明,在浸出温度50℃、酸矿比0.3∶1、液固比4∶1、浸出时间6 h条件下,以渣计铜浸出率达到94.34%、钴浸出率达到97.57%,浸出液中铜含量为12.38 g/L,钴含量为0.73 g/L,铁、锰、镁等杂质含量均较低。

关 键 词:氧化铜钴矿      硫酸浸出

Leaching Test of an Oxidized Copper-Cobalt Concentrate
Abstract:Leaching test was conducted with sulfuric acid as leaching agent for an oxidized copper?cobalt concentrate containing 5.75% copper and 0.34% cobalt, with copper oxidation rate at 78.96%. The leaching test at the temperature of 50 ℃, with sulfuric acid and ore in the ratio of 0.3∶1 and liquid?solid ratio at 4∶1, leaching time of 6 h, resulted in the copper and cobalt leaching rates in terms of leach residue reaching 94.34%and 97.57%, respectively, and the leach solution containing 12.38 g/L copper, 0.73 g/L cobalt and trace of impurities of iron, manganese, magnesium, etc.
Keywords:oxidized copper-cobalt ore  copper  cobalt  sulfuric acid leaching
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号