首页 | 本学科首页   官方微博 | 高级检索  
     

水热法四氧化三锰超细粉体的研制与表征
引用本文:汤林,陈权启,黄可龙.水热法四氧化三锰超细粉体的研制与表征[J].矿冶工程,2003,23(2):63-65.
作者姓名:汤林  陈权启  黄可龙
作者单位:1. 中南林学院,理学院,湖南,长沙,410003
2. 中南大学,化学化工学院,湖南,长沙,410083
摘    要:以乙醇和高锰酸钾为原料,利用高压反应釜水热法制备四氧化三锰超细粉体。研究和讨论了反应温度、反应时间、反应物浓度对实验结果的影响,最终得到反应的最佳条件。并对所制备的产物进行表征,经XRD进行物相分析,确认产物为单一相的Mn304,经粒度分析仪及扫描电镜检测,产物的粒径为50—90nm,为球状颗粒且没有明显的团聚现象。

关 键 词:水热法  四氧化三锰  超细粉体  研制  表征
修稿时间:2002年12月26

Preparation of Hyperfine Manganic Manganous Oxide Powder Using Hydrothermal Method and Its Characterization
TANG Lin ,CHEN Quan-qi ,HUANG Ke-long.Preparation of Hyperfine Manganic Manganous Oxide Powder Using Hydrothermal Method and Its Characterization[J].Mining and Metallurgical Engineering,2003,23(2):63-65.
Authors:TANG Lin  CHEN Quan-qi  HUANG Ke-long
Affiliation:TANG Lin 1,CHEN Quan-qi 2,HUANG Ke-long 2
Abstract:With ethanol and potassium permanganate as raw material,hyperfin e Mn 3O 4 powder is prepared using hydrothermal method. The effects of reactio n temperature and time and reactant concentration on experimental results are investigated, obtaining finally the optimum experimental conditions. Through it s characterization and XRD analysis, the product prepared using the method is co nfirmed to be a single-phase Mn 3O 4. The results obtained by size analysis a nd SEM measurement show that the product ranges from 50 nm to 90 nm in size, occ urs as spherical particles and has no agglomerate in it.
Keywords:hydrothermal method  manganic manganous oxide  hyperfine powd er
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号