| 西藏某铜铅锌硫化矿浮选工艺研究 |
| |
| 引用本文： | 刘安荣,唐云,陈福林.西藏某铜铅锌硫化矿浮选工艺研究[J].矿冶工程,2009,29(2). |
| |
| 作者姓名： | 刘安荣 唐云 陈福林 |
| |
| 作者单位： | 1. 贵州大学矿业学院,贵州,贵阳,550003
2. 成都综合岩矿测试中心,四川,成都,610081 |
| |
| 摘 要： | 根据西藏某铜铅锌硫化矿矿石的性质,分别研究了磨矿粒度、捕收剂及工艺流程对浮选的影响.在磨矿粒度为-0.074mm占67.00%条件下,以乙黄药和乙硫氮的混合物为捕收剂,采用一粗一精两扣闭路浮选工艺流程,获得混合精矿中铜、铅、锌的品位分别为13.81%、16.74%、22.41%,回收率分别为95.47%、93.85%、94.04%.
|
| 关 键 词： | 铜铅锌硫化矿 磨矿粒度 浮选 混合精矿 |
Study on Flotation Technique of a Copper-lead-zinc Sulfide Ore in Xizang |
| |
| LIU An-rong,TANG Yun,CHEN Fu-lin.Study on Flotation Technique of a Copper-lead-zinc Sulfide Ore in Xizang[J].Mining and Metallurgical Engineering,2009,29(2). |
| |
| Authors: | LIU An-rong TANG Yun CHEN Fu-lin |
| |
| Affiliation: | 1.Mining Institute;Guizhou University;Guiyang 550003;Guizhou;China;2.Chengdu Comprehensive Rock and Ore Test Centre;Chengdu 610081;Sichuan;China |
| |
| Abstract: | Integrated with ore properties,the effects of grinding fineness,collector agents and process flowsheet on the flotation of a copper-lead-zinc sulfide ore in Xizang were investigated,through which the processing parameters were determined.Adopting a closed-circuit flowsheet including one stage of roughing,one stage of cleaning and two stages of scavenging,with a grinding fineness of-0.074 mm range as around 67.00%,and using a combined collector of ethyl xanthate and diethyldithiocarbamate,a bulk concentrate ... |
| |
| Keywords: | copper-lead-zinc sulfide ore grinding fineness flotation bulk concentrate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
