首页 | 本学科首页   官方微博 | 高级检索  
     

焙烧-浸出-磁选回收铜渣中的铁
引用本文:詹保峰,黄自力,杨孽,刘玉飞,焦成鹏.焙烧-浸出-磁选回收铜渣中的铁[J].矿冶工程,2015,35(2):103-106.
作者姓名:詹保峰  黄自力  杨孽  刘玉飞  焦成鹏
作者单位:武汉科技大学 冶金矿产资源高效利用与造块湖北省重点实验室, 湖北 武汉 430081
摘    要:以煤粉作还原剂, 采用焙烧-浸出-磁选工艺对某铜渣中的铁进行了回收实验研究。探讨了焙烧温度、焙烧时间、煤粉用量、碳酸钠用量等因素对铁回收的影响, 最佳工艺条件为: 焙烧温度800 ℃, 焙烧时间60 min, 煤粉用量1%, 碳酸钠用量10%, 在此条件下获得的焙砂经进一步稀酸浸出和磁选, 可获得铁品位62.53%、铁回收率70.82%的铁精矿。

关 键 词:铜渣    焙烧  浸出  磁选  
收稿时间:2014-10-18

Recovery of Iron from Copper-slag with Process of Roasting-Leaching-Magnetic Separation
ZHAN Bao-feng,HUANG Zi-li,YANG Nie,LIU Yu-fei,JIAO Cheng-peng.Recovery of Iron from Copper-slag with Process of Roasting-Leaching-Magnetic Separation[J].Mining and Metallurgical Engineering,2015,35(2):103-106.
Authors:ZHAN Bao-feng  HUANG Zi-li  YANG Nie  LIU Yu-fei  JIAO Cheng-peng
Affiliation:Hubei Key Laboratory for Efficient Utilization and Agglomeration of Metallurgic Resources, Wuhan University of Science and Technology, Hubei 430081, Wuhan, China
Abstract:With coal dust as reductant, recovery of iron from some copper-slag with the process of roasting-leaching-magnetic separation was tested, with the effects of roasting time and temperature, dosage of coal dust and sodium carbonate on the iron recovery investigated. The optimum condition was obtained as follows: roasting temperature of 800 ℃, roasting time of 60 minutes, dosage of coal dust and sodium carbonate of 1% and 10%, respectively. The calcine obtained was further subjected to the process of dilute acid leaching and magnetic separation, resulting in an iron concentrate grading 62.53% Fe at 70.82% recovery.
Keywords:copper-slag  iron  roasting  leaching  magnetic separation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《矿冶工程》浏览原始摘要信息
点击此处可从《矿冶工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号