|
|||||
|
|
| 回转窑托轮对轮带最佳支承角的有限元优化 | |
| 引用本文： | 李学军,肖友刚,王梅松,赵先琼.回转窑托轮对轮带最佳支承角的有限元优化[J].矿冶工程,2003,23(4):48-50. |
| 作者姓名： | 李学军 肖友刚 王梅松 赵先琼 |
| 作者单位： | 1. 湖南科技大学,机械设备健康维护湖南省重点实验室,湖南,湘潭,411201 2. 中南大学,机电工程学院,湖南,长沙,410083 3. 湖南韶峰水泥集团有限公司,湖南,湘潭,411423 |
| 基金项目： | 国家重点基础研究发展规划项目 (G1 9990 6491 0 ) |
| 摘 要： | 针对回转窑的结构特点，在求得轮带接触压力分布的基础上，建立了轮带支承角的有限元优化模型。运用ANSYS6．1对轮带支承角进行了有限元优化，得出了优化前后轮带的应力分布规律。优化结果表明：轮带支承角有限元优化能显著减少轮带变形及最大等效应力，且轮带变形和最大等效应力对轮带支承角的变化非常敏感。 |
| 关 键 词： | 回转窑 轮带 接触应力分布 支承角 有限元 优化 |
| 修稿时间： | 2003年4月20日 |
Optimum Supporting Angles of Kiln Wheel to Wheel Belt --A FEM Optimization |
|
| LI Xue-jun ,XIAO You-gang ,WANG Mei-song ,ZHAO Xian-qiong.Optimum Supporting Angles of Kiln Wheel to Wheel Belt --A FEM Optimization[J].Mining and Metallurgical Engineering,2003,23(4):48-50. | |
| Authors: | LI Xue-jun XIAO You-gang WANG Mei-song ZHAO Xian-qiong |
| Affiliation: | LI Xue-jun 1,XIAO You-gang 2,WANG Mei-song 3,ZHAO Xian-qiong 2 |
| Abstract: | According to the structural characteristics of rotary kiln and the known contact pressure distribution of its wheel belt, a FEM optimal model of the wheel belt's supporting angles is set up. The FME optimization of the wheel belt's supporting angles is executed using ANSYS 6.1, obtaining the stress distribution rule before and after optimization. From the results obtained it is shown that the FEM optimization of the wheel belt's suporting angles can reduce greatly the deformation and maximum equivalent stress of the wheel belt, both of which are very sensitive to the variation in the wheel belt's supporting angle. |
| Keywords: | rotary kiln wheel belt contact stress distribution support angle FEM optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |