| 基于振动信号的定量斗装载测量方法研究 |
| |
| 引用本文： | 盛延平,杨克虎,王晨旭.基于振动信号的定量斗装载测量方法研究[J].煤矿机械,2021(1):44-47. |
| |
| 作者姓名： | 盛延平 杨克虎 王晨旭 |
| |
| 作者单位： | ;1.中国矿业大学(北京)机电与信息工程学院 |
| |
| 基金项目： | 国家自然科学基金重点项目子课题(61936008);国家自然科学基金面上项目(61973307)。 |
| |
| 摘 要： | 定量斗通过安装在其底部的称重传感器对矿石进行动态称重,由于称重传感器直接承受矿石重量冲击力,导致称重传感器易损坏,降低生产效率。基于定量斗侧壁振动频率随矿石装载高度的变化而改变这一基本原理,提出了一种定量斗装载测量的间接方法。该方法通过测量矿石装载高度间接测量矿石重量,解决了称重传感器因直接承受矿石重量及冲击力易损坏的问题,提高了测量装置的可靠性和使用寿命。
|
| 关 键 词： | 定量斗 装载测量 振动信号 BP神经网络 |
Research on Quantitative Hopper Loading Measurement Method Based on Vibration Signals |
| |
| Sheng Yanping,Yang Kehu,Wang Chenxu.Research on Quantitative Hopper Loading Measurement Method Based on Vibration Signals[J].Coal Mine Machinery,2021(1):44-47. |
| |
| Authors: | Sheng Yanping Yang Kehu Wang Chenxu |
| |
| Affiliation: | (School of Mechanical and Electrical and Information Engineering,China University of Mining and Technology(Beijing),Beijing 100083,China) |
| |
| Abstract: | The quantitative hopper weighs the ore dynamically through the weighing sensor installed at bottom of the hopper,the weighing sensor is easily damaged, and the production efficiency is reduced because the weighing sensor directly bears the impact force of ore weight. Based on the principle that the vibration frequency of the side wall of the quantitative hopper changes with the ore loading height,an indirect method for quantitative hopper loading measurement was proposed. This method indirectly measures the weight of the ore by measuring the the loading height of ore,solves the problem that the weighting sensor is easy to be damaged due to directly bearing the ore weight and impact force,and improves the reliability and service life of the measuring device. |
| |
| Keywords: | quantitative hopper loading measurement vibration signal BP neural network |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
